Show simple item record

dc.contributor.authorRiera Colom, María Dolores
dc.contributor.authorMarbà, Isidre
dc.contributor.authorPrado Pozuelo, José Manuel
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica
dc.date.accessioned2011-11-18T17:53:34Z
dc.date.available2011-11-18T17:53:34Z
dc.date.created2003
dc.date.issued2003
dc.identifier.citationRiera, M.; Marbà, I.; Prado, J. Elastic behaviour under compressive stresses states of sintered metallic parts. A: European Congress and Exhibition on Powder Metallurgy. "EURO PM2003". Shrewsbury: European Powder Metallurgy Association, 2003, p. 447-452.
dc.identifier.isbn1899072179
dc.identifier.urihttp://hdl.handle.net/2117/13967
dc.description.abstractThe mechanical response in service of a component is mainly determined by its elastic behaviour. Traditionally, metallic materials have been characterized by means of tensile tests, even in the case of sintered ones. In this condition, the elasticity of sintered parts has been always supposed to be linear, with a Young modulus dependent on the density. However, no attention has received the elastic behaviour under compressive stresses. In this work, the authors present the results obtained from cyclic uniaxial compression tests applied on sintered metallic samples with different densities. The elastic behaviour under compression is no longer linear and different mechanisms occur during the deformation process. Assuming a power law relating compressive stress and strain, an elastic modulus dependent on the density and the loading path has been obtained.
dc.format.extent6 p.
dc.language.isoeng
dc.publisherEuropean Powder Metallurgy
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials::Metal·lúrgia
dc.subject.lcshPowder metallurgy -- Mathematical models
dc.subject.lcshElasticity
dc.titleElastic behaviour under compressive stresses states of sintered metallic parts
dc.typeConference report
dc.subject.lemacMetal·lúrgia -- Models matemàtics
dc.subject.lemacElasticitat
dc.contributor.groupUniversitat Politècnica de Catalunya. PROCOMAME - Processos de Conformació de Materials Metàl·lics
dc.relation.publisherversionhttp://cataleg.upc.edu/record=b1245259~S1*cat
dc.rights.accessOpen Access
local.identifier.drac5306228
dc.description.versionPostprint (published version)
local.citation.authorRiera, M.; Marbà, I.; Prado, J.
local.citation.contributorEuropean Congress and Exhibition on Powder Metallurgy
local.citation.pubplaceShrewsbury
local.citation.publicationNameEURO PM2003
local.citation.startingPage447
local.citation.endingPage452


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder