Show simple item record

dc.contributor.authorRiera Colom, María Dolores
dc.contributor.authorPrado Pozuelo, José Manuel
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica
dc.date.accessioned2011-11-18T17:48:06Z
dc.date.available2011-11-18T17:48:06Z
dc.date.created2003
dc.date.issued2003
dc.identifier.citationRiera, M.; Prado, J. Elastoplastic simulation of contacts among particles in granular materials. A: European Congress and Exhibition on Powder Metallurgy. "EURO PM2003". Shrewsbury: European Powder Metallurgy Association, 2003, p. 105-110.
dc.identifier.isbn1899072179
dc.identifier.urihttp://hdl.handle.net/2117/13966
dc.description.abstractThe mechanisms governing the densification of powdered materials under compaction are highly dependent on the deformation and the state of stress in the contact among particles. Therefore, a micromechanical model can be very useful in studying the phenomena involved in the compaction process. In this work numerical simulations showing the distributions of strain and stress in models containing two and four particles are presented. The evolution of the deformation in the contact area among particles, the residual stresses appeared after releasing the compressive load and their consequences on the macroscopic mechanical behaviour of powder compacts are here analysed
dc.format.extent6 p.
dc.language.isoeng
dc.publisherEuropean Powder Metallurgy Association
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials::Metal·lúrgia
dc.subject.lcshPowder metallurgy -- Mathematical models
dc.subject.lcshGranular materials
dc.titleElastoplastic simulation of contacts among particles in granular materials
dc.typeConference report
dc.subject.lemacMetal·lúrgia -- Models matemàtics
dc.subject.lemacMaterials granulars
dc.contributor.groupUniversitat Politècnica de Catalunya. PROCOMAME - Processos de Conformació de Materials Metàl·lics
dc.relation.publisherversionhttp://cataleg.upc.edu/record=b1245259~S1*cat
dc.rights.accessOpen Access
local.identifier.drac5306241
dc.description.versionPostprint (published version)
local.citation.authorRiera, M.; Prado, J.
local.citation.contributorEuropean Congress and Exhibition on Powder Metallurgy
local.citation.pubplaceShrewsbury
local.citation.publicationNameEURO PM2003
local.citation.startingPage105
local.citation.endingPage110


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder