Show simple item record

dc.contributor.authorKrkotic, Patrick
dc.contributor.authorAguasca Solé, Alberto
dc.contributor.authorO'Callaghan Castellà, Juan Manuel
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Teoria del Senyal i Comunicacions
dc.date.accessioned2019-05-27T14:46:00Z
dc.date.issued2018
dc.identifier.citationKrkotic, P.; Aguasca, A.; O'callaghan, J. Small footprint evaluation of metal coatings for additive manufacturing. A: European Microwave Conference. "2018 48th European Microwave Conference (EuMC 2018): Madrid, Spain: 23-27 September 2018". Institute of Electrical and Electronics Engineers (IEEE), 2018, p. 882-885.
dc.identifier.isbn978-1-5386-5285-5
dc.identifier.urihttp://hdl.handle.net/2117/133554
dc.description.abstractRutile resonators have been used in the past to characterize high-temperature superconductors. In this work we describe a novel use of this type of resonator: the characterization of surface resistance in metal coatings deposited on plastic substrates at 9.1 GHz. A very small sample surface (about 1 cm 2 ) is required due to the high permittivity of rutile. We describe the use of the resonator to analyze pairs of small samples and to analyze the homogeneity of a sample set diced from a larger metallized surface. We also show a novel experimental method to determine the geometrical factors in dielectric resonators.
dc.format.extent4 p.
dc.language.isoeng
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)
dc.subjectÀrees temàtiques de la UPC::Física::Electromagnetisme::Ones electromagnètiques
dc.subject.lcshResonators
dc.subject.otherMetal coating
dc.subject.otherAdditive manufacturing
dc.subject.otherRutile resonator
dc.titleSmall footprint evaluation of metal coatings for additive manufacturing
dc.typeConference lecture
dc.subject.lemacRessonadors
dc.contributor.groupUniversitat Politècnica de Catalunya. RSLAB - Grup de Recerca en Teledetecció
dc.contributor.groupUniversitat Politècnica de Catalunya. RF&MW - Grup de Recerca de sistemes, dispositius i materials de RF i microones
dc.identifier.doi10.23919/eumc.2018.8541442
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttps://ieeexplore.ieee.org/document/8541442
dc.rights.accessRestricted access - publisher's policy
drac.iddocument23619012
dc.description.versionPostprint (published version)
dc.relation.projectidinfo:eu-repo/grantAgreement/MINECO/1PE/MDM-2016-0600
dc.date.lift10000-01-01
upcommons.citation.authorKrkotic, P.; Aguasca, A.; O'callaghan, J.
upcommons.citation.contributorEuropean Microwave Conference
upcommons.citation.publishedtrue
upcommons.citation.publicationName2018 48th European Microwave Conference (EuMC 2018): Madrid, Spain: 23-27 September 2018
upcommons.citation.startingPage882
upcommons.citation.endingPage885


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder