Show simple item record

dc.contributor.authorHajdin, Rade
dc.contributor.authorCasas Rius, Joan Ramon
dc.contributor.authorMatos, Jose C.
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Civil i Ambiental
dc.date.accessioned2019-05-01T21:38:56Z
dc.date.issued2019
dc.identifier.citationHajdin, R.; Casas, J.; Matos, J. Inspection of existing bridges: moving on from condition rating. A: International Association for Bridge and Structural Engineering Symposium. "IABSE Symposium Guimarães 2019: Towards a Resilient Built Environment - Risk and Asset Management, March 27-29, 2019, Guimarães, Portugal". International Association for Bridge and Structural Engineers (IABSE), 2019, p. 940-947.
dc.identifier.isbn978-3-85748-163-5
dc.identifier.urihttp://hdl.handle.net/2117/132453
dc.description.abstractIt is widely accepted that safety and serviceability are primary concerns in bridge design. However, for the most of bridges’ service life, these concerns are addressed indirectly by a qualitative measure, defined herein as condition rating, which is based upon observable damages recorded during inspections. Condition rating is at best, only loosely correlated to safety and serviceability. It would be more reasonable to address safety and serviceability in an inspection process directly, using the information on bridge performance obtained during the design and construction. To address this issue, the reliability was chosen as a Key Performance Indicators (KPI) for existing bridges and a novel practical solution is proposed. It is based on survey of observation types (visible defects, measurements, etc.) used in Europe, which were examined with regard to their potential impact on reliability regarding safety and serviceability. The impact of these observations on reliability is also dependent on their type, location and intensity/extent as well as on bridge structural systems. The paper presents a methodology to assess reliability, which heavily relies on data from design and construction phase. It also proposes a set of data elaborated in design and/or construction phase that need to enter current bridge data bases to allow a rough reliability assessment of existing bridges.
dc.format.extent8 p.
dc.language.isoeng
dc.publisherInternational Association for Bridge and Structural Engineers (IABSE)
dc.subjectÀrees temàtiques de la UPC::Enginyeria civil::Materials i estructures::Tipologies estructurals
dc.subject.lcshBridges -- Maintenance and repair
dc.subject.othercondition
dc.subject.otherdecision making
dc.subject.otherKPI
dc.subject.otherinspection
dc.subject.otherreliability
dc.subject.otherexisting bridges
dc.subject.otherBayesian net
dc.titleInspection of existing bridges: moving on from condition rating
dc.typeConference report
dc.subject.lemacPonts -- Manteniment i reparació
dc.contributor.groupUniversitat Politècnica de Catalunya. EC - Enginyeria de la Construcció
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac24022485
dc.description.versionPostprint (published version)
dc.date.lift10000-01-01
local.citation.authorHajdin, R.; Casas, J.; Matos, J.
local.citation.contributorInternational Association for Bridge and Structural Engineering Symposium
local.citation.publicationNameIABSE Symposium Guimarães 2019: Towards a Resilient Built Environment - Risk and Asset Management, March 27-29, 2019, Guimarães, Portugal
local.citation.startingPage940
local.citation.endingPage947


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder