Ponències/Comunicacions de congressos: Enviaments recents

Ara es mostren els items 1-8 de 8

    • Optimization of synthetic jet actuation on a SD7003 airfoil in stall conditions 

      Monshi Tousi, Navid; El Mansy, Reda; Mellibovsky Elstein, Fernando; Bergadà Granyó, Josep Maria (2022)
      Text en actes de congrés
      Accés obert
      We optimise a set of Synthetic Jet (SJ) Active Flow Control (AFC) parameters on a SD7003 airfoil in order to maximise lift and aerodynamic efficiency. 2D-RANS with the Spallart Almaras (SA) turbulence model is employed in ...

    • Square cylinder downstream of two different-velocity streams 

      El Mansy, Reda; Monshi Tousi, Navid; Bergadà Granyó, Josep Maria; Mellibovsky Elstein, Fernando (2022)
      Comunicació de congrés
      Accés obert
      We study the flow past a square cylinder immersed in the wake of an upstream splitter plate separating two different-velocity streams. The bottom stream Reynolds number, ReB = 56 is kept constant for all cases, while the ...

    • Aerodynamic study of the NASA’s X-43A hypersonic aircraft 

      Navó, Alex; Bergadà Granyó, Josep Maria (2022)
      Text en actes de congrés
      Accés obert
      A two-dimensional aerodynamic study of the NASA’s X-43A hypersonic aircraft is developed using two different approaches. The first one is analytical and based on the resolution of the oblique shock wave and Prandtl–Meyer ...

    • Capillary microfluidics for immunoassays by integrating 3D printing and pressure-sensitive adhesive 

      Azizian, Pooya; Guerrero-SanVicente, Elena; Grinyte, Ruta; Casals Terré, Jasmina; Cabot, Joan Marc (2021)
      Text en actes de congrés
      Accés restringit per política de l'editorial
      Herein, we present a versatile immunoassay device made by 3D-printed (3DP) multilevel microfluidic chip sealed by an optically clear Pressure-Sensitive Adhesive (PSA). The bioreceptors were effectively immobilized on the ...

    • 3D skin microfluidic phantom for in vitro wearable testing 

      Rabost Garcia, Genís; Carreras Gallo, Óscar; Colmena, Valeria; Aguilar, Javier; Punter Villagrasa, Jaime; Muñoz Pascual, Francesc Xavier; Farré Lladós, Josep; Casals Terré, Jasmina (2020)
      Comunicació de congrés
      Accés restringit per política de l'editorial
      A standardized and cost-effective perspiration phantom for in vitro testing is needed to replace the variable and resource consuming human tests at research level. Here, an alternative to the existing devices, which mainly ...

    • 3D-printing and computational fluid dynamics "meet" paperbased microfluidics for enhanced flow control in difusive sensors 

      López Martínez, Joan Antoni; Fernández, Pau; Mehrdel, Pouya; Casals Terré, Jasmina (2020)
      Comunicació de congrés
      Accés restringit per política de l'editorial
      This paper proposes combination of a 3D printed cartridge and paper-based microfluidic design that minimizes the amount of sample required to achieve the best control over the diffusion Y-microfluidic mixers. The use of ...

    • Multilevel passive microfluidics for electrochemical biosensors 

      Azizian, Pooya; Ortega Novillo, Adrián; Ricart Campos, Jordi; Casals Terré, Jasmina; Cabot, Joan Marc (2020)
      Comunicació de congrés
      Accés restringit per política de l'editorial
      Herein, we present a proof-of-concept 3D (multilevel) passive microfluidic device for point-of-care applications including electrochemical biosensors. Multiphase flow (air-water interface) within multilevel microchannels ...

    • Potencial de la celulosa en la construcción de nuevos materiales 

      Vidal Lluciá, Teresa; Torres López, Antonio Luis; Valls Vidal, Cristina; Cusola Aumedes, Oriol; López Martínez, Joan Antoni; Fernández Santos, Julia; Clemente Escuin, Antonio; Roncero Vivero, María Blanca; Casals Terré, Jasmina; Farré Lladós, Josep (2019)
      Text en actes de congrés
      Accés obert
      Actualmente, más de una tercera parte de los tipos de papeles que hoy empleamos son para nuevos usos que hace diez años no existían. Además, la demanda creciente de productos basados en materias primas renovables y la ...