Mostra el registre d'ítem simple
Simulation and implementation of IEEE 802.11p standard communications
dc.contributor | Lázaro Villa, José Antonio |
dc.contributor.author | Mas Ferrer, Marc |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament de Teoria del Senyal i Comunicacions |
dc.date.accessioned | 2019-02-03T16:04:01Z |
dc.date.available | 2019-02-03T16:04:01Z |
dc.date.issued | 2018-10 |
dc.identifier.uri | http://hdl.handle.net/2117/128171 |
dc.description | 5G is the next paradigm for mobile communications, and optical fiber networks are expected to be the transport media. This Final Degree Work will focus on the signal processing of the experimentally generated optical signals using the modulation formats proposed for the 5G networks. |
dc.description.abstract | The main objective of this project is to test, in a MATLAB simulation environment the physical layer of the Wi-Fi standard named IEEE 802.11p, and then in a laboratory environment, test its possibilities by sending and receiving packets using a Red Pitaya. To do so, the first thing that had to be done was the research on the standard (when and why is it used, its physical and MAC layers characteristics and the differences between it and the other existing Wi-Fi standards). Secondly, a MATLAB application which simulates the transmission of packets with the IEEE 802.11p format had to be done. Finally, using the MATLAB code and a Red Pitaya, the IEEE 802.11p packets were sent electrically and received by the same Red Pitaya. |
dc.description.abstract | El objetivo principal de este proyecto es probar, en un entorno de simulación MATLAB, la capa física del estándar Wi-Fi denominado IEEE 802.11p, y después, en un entorno de laboratorio, probar sus posibilidades enviando y recibiendo paquetes utilizando Red Pitaya. Para hacerlo, lo primero que se tuvo que hacer fue la investigación sobre el estándar (cuándo y por qué se usa, las características de sus capas física y MAC y las diferencias entre éste y los otros estándares de Wi-Fi existentes). En segundo lugar, se desarrolló una aplicación MATLAB que simula la transmisión de paquetes con el formato IEEE 802.11p. Finalmente, usando el código MATLAB y una Red Pitaya, los paquetes IEEE 802.11p fueron enviados eléctricamente y recibidos por el mismo Red Pitaya. |
dc.description.abstract | L'objectiu principal d'aquest projecte és provar, en un entorn de simulació MATLAB, la capa física de l'estàndard Wi-Fi denominat IEEE 802.11p, i després, en un entorn de laboratori, provar les seves possibilitats enviant i rebent paquets utilitzant Red Pitaya. Per fer-ho, el primer que es va haver de fer, va ser la investigació sobre l'estàndard (quan i per què es fa servir, les característiques de les seves capes física i MAC i les diferències entre aquest i els altres estàndards de Wi-Fi existents). En segon lloc, es va desenvolupar una aplicació MATLAB que simula la transmissió de paquets amb el format IEEE 802.11p. Finalment, usant el codi MATLAB i una Red Pitaya, els paquets IEEE 802.11p van ser enviats elèctricament i rebuts pel mateix Red Pitaya. |
dc.language.iso | eng |
dc.publisher | Universitat Politècnica de Catalunya |
dc.rights | S'autoritza la difusió de l'obra mitjançant la llicència Creative Commons o similar 'Reconeixement-NoComercial- SenseObraDerivada' |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Enginyeria de la telecomunicació |
dc.subject.lcsh | Computer simulation |
dc.subject.lcsh | MATLAB |
dc.subject.other | simulation |
dc.subject.other | communications |
dc.subject.other | simulacion |
dc.subject.other | comunicaciones |
dc.title | Simulation and implementation of IEEE 802.11p standard communications |
dc.title.alternative | Simulación e implementación de comunicaciones del estándar IEEE 802.11p |
dc.title.alternative | Simulació i implementació de comunicacions del estàndard IEEE 802.11p |
dc.type | Bachelor thesis |
dc.subject.lemac | Simulació per ordinador |
dc.subject.lemac | MATLAB |
dc.identifier.slug | ETSETB-230.135461 |
dc.rights.access | Open Access |
dc.date.updated | 2019-01-22T06:50:42Z |
dc.audience.educationlevel | Grau |
dc.audience.mediator | Escola Tècnica Superior d'Enginyeria de Telecomunicació de Barcelona |
dc.audience.degree | GRAU EN ENGINYERIA DE TECNOLOGIES I SERVEIS DE TELECOMUNICACIÓ (Pla 2015) |