Mostra el registre d'ítem simple

Outline process from the synthesis towards the nonlinear modeling of Bulk Acoustic Wave filters

dc.contributor.authorMateu Mateu, Jordi
dc.contributor.authorCollado Gómez, Juan Carlos
dc.contributor.authorHueltes Escobar, Alberto
dc.contributor.authorPerea Robles, Rafael
dc.contributor.authorGarcía Pastor, David
dc.contributor.authorGonzález Rodríguez, Marta
dc.contributor.authorGonzález Arbesú, José María
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Teoria del Senyal i Comunicacions
dc.date.accessioned2019-01-29T09:42:47Z
dc.date.issued2018
dc.identifier.citationMateu, J. [et al.]. Outline process from the synthesis towards the nonlinear modeling of Bulk Acoustic Wave filters. A: IEEE MTT-S International Microwave Symposium. "Proceedings of the 2018 IEEE/MTT-S International Microwave Symposium : 10-15 June 2018, Philadelphia, Pennsylvania, USA". Institute of Electrical and Electronics Engineers (IEEE), 2018, p. 413-416.
dc.identifier.isbn978-153865067-7
dc.identifier.urihttp://hdl.handle.net/2117/127780
dc.description.abstractThis work presents the nonlinear modeling of a real acoustic wave filter set at the cellular commercial receiver band B40. The paper outlines the synthesis procedure of the acoustic filter and presents the filter performance of the fabricated device in both, a narrow-band and a broadband range. Differences between synthesized and fabricated filters are modeled afterwards in order to account for all the out-of-band features. Measurements of the second harmonic have been performed over the bandwidth of the filter. Modeling of the nonlinear response has been developed by using nonlinear models of the acoustic wave resonators forming the filter.
dc.format.extent4 p.
dc.language.isoeng
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)
dc.subjectÀrees temàtiques de la UPC::Enginyeria de la telecomunicació::Radiocomunicació i exploració electromagnètica::Circuits de microones, radiofreqüència i ones mil·limètriques
dc.subject.lcshAcoustic surface waves
dc.subject.lcshResonators
dc.subject.otherAcoustic Filters
dc.subject.otherNonlinear modeling
dc.subject.otherNonlinear response
dc.subject.otherSecond Harmonic Acoustic waves
dc.subject.otherNonlinear systems
dc.subject.otherWave filters
dc.subject.otherAcoustic filters
dc.subject.otherAcoustic wave resonators
dc.subject.otherBulk acoustic wave filter
dc.subject.otherFilter performance
dc.subject.otherNon-linear model
dc.subject.otherNon-linear response
dc.subject.otherSecond harmonics
dc.subject.otherSynthesis procedure
dc.subject.otherAcoustic resonators
dc.titleOutline process from the synthesis towards the nonlinear modeling of Bulk Acoustic Wave filters
dc.typeConference report
dc.subject.lemacOnes acústiques de superfície
dc.subject.lemacRessonadors
dc.contributor.groupUniversitat Politècnica de Catalunya. CSC - Components and Systems for Communications Research Group
dc.identifier.doi10.1109/MWSYM.2018.8439361
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttps://ieeexplore.ieee.org/document/8439361
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac23444691
dc.description.versionPostprint (published version)
dc.date.lift10000-01-01
local.citation.authorMateu, J.; Collado, J.; Hueltes, A.; Perea-Robles, R.; Garcia, D.; Gonzalez-Rodriguez, M.; Gonzalez, J.
local.citation.contributorIEEE MTT-S International Microwave Symposium
local.citation.publicationNameProceedings of the 2018 IEEE/MTT-S International Microwave Symposium : 10-15 June 2018, Philadelphia, Pennsylvania, USA
local.citation.startingPage413
local.citation.endingPage416


Fitxers d'aquest items

Imatge en miniatura
Nom:
08439361.pdf
Mida:
4,084Mb
Format:
PDF
Visualitza/Obre

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple