Influence of fused deposition modeling (FDM) parameters on surface finish of plastic parts
Visualitza/Obre
Buj_TMT.pdf (549,9Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/125776
Tipus de documentText en actes de congrés
Data publicació2018
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
In the present paper, influence of FDM (fused deposition modeling) parameters on surface finish of printed parts is presented. Cylindrical specimens were printed in PLA (Polylactic Acid). Five
variables were considered, namely layer height, infill, printing angle, nozzle diameter and plastic temperatu re. A fractional factorial design was defined with central points. Roughness of printed parts
was measured with a contact roughness meter and different oughness parameters were determined.
Main factors influencing surface roughness are printing angle and
layer height, while the rest of the variables had much lower influence on surface finish. In the future, geometry and mechanical strength of the specimens will be studied and analyzed, and multiobjective optimization will be carried out.
CitacióBuj, I., Marco-Almagro, L., Rodero, L., Dominguez, A. Influence of fused deposition modeling (FDM) parameters on surface finish of plastic parts. A: International Research/Expert Conference.. "Proceedings of the 21st International Research/Expert Conference". 2018, p. 1-4.
ISBN1840-4944
Col·leccions
- Departament d'Enginyeria mecànica - Ponències/Comunicacions de congressos [481]
- TECNOFAB - Grup de Recerca en Tecnologies de Fabricació - Ponències/Comunicacions de congressos [78]
- ADBD - Anàlisi de Dades Complexes per a les Decisions Empresarials - Ponències/Comunicacions de congressos [10]
- Departament d'Estadística i Investigació Operativa - Ponències/Comunicacions de congressos [254]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Buj_TMT.pdf | 549,9Kb | Accés restringit |