Multi-antenna configuration modeling for massive MIMO V2I
Visualitza/Obre
08568766.pdf (341,6Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/125603
Tipus de documentText en actes de congrés
Data publicació2018
EditorInstitute of Electrical and Electronics Engineers (IEEE)
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
There is a growing research interest in massive Multiple Input Multiple Output (MIMO) antenna systems because of their higher channel capacity and energy efficiency. New applications in digital mobility and connected car is certainly one of the areas of future development of these systems. In order to study the impact of the different multi-antenna geometries and MIMO modalities in both the vehicle and the fixed base station, a quality modeling of a realistic scenario is needed. In this paper, study of initial antenna configurations for both - mobile and fixed - platforms is performed and initial channel parameters and system capability are obtained. Then, several systems and constellations are compared by means of the channel eigenvalues and capacity. The analysis is based on the results of a simulated model of an urban scenario, emulating as a case of study a portion of the city of Barcelona in a realistic environment, comprising of a massive MIMO base station and a car at various positions.
Descripció
©2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
CitacióPfadler, A., Ballesteros, C., Romeu, J., Jofre, L. Multi-antenna configuration modeling for massive MIMO V2I. A: European Conference on Antennas and Propagation. "12th European Conference on Antennas and Propagation (EuCAP 2018)". Institute of Electrical and Electronics Engineers (IEEE), 2018, p. 1-5.
ISBN978-1-78561-816-1
Versió de l'editorhttps://ieeexplore.ieee.org/document/8568766
Col·leccions
- LEAM - Laboratori d'Enginyeria Acústica i Mecànica - Ponències/Comunicacions de congressos [70]
- Departament d'Enginyeria mecànica - Ponències/Comunicacions de congressos [481]
- ANTENNALAB - Grup d'Antenes i Sistemes Radio - Ponències/Comunicacions de congressos [333]
- Departament de Teoria del Senyal i Comunicacions - Ponències/Comunicacions de congressos [3.327]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
08568766.pdf | 341,6Kb | Accés restringit |