Mostra el registre d'ítem simple

dc.contributor.authorCoba Salcedo, Milton
dc.contributor.authorBuj Corral, Irene
dc.contributor.authorPearanda Carrillo, Meimer
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Mecànica
dc.date.accessioned2018-11-22T12:12:09Z
dc.date.available2018-11-22T12:12:09Z
dc.date.issued2018
dc.identifier.citationCoba, M., Buj, I., Pearanda, M. Approximation of An Experimental Model Obtained in A Testing Machine for use in an Industrial Production Machine. "International Journal of ChemTech Research", 2018, vol. 11, núm. 10, p. 321-332.
dc.identifier.issn0974-4290
dc.identifier.urihttp://hdl.handle.net/2117/124911
dc.description.abstractDesign of experiments (DOE) is a powerful tool that allows performing the modeling and analysis of the influence of factors of the process on the specified variables, which are often called response variables. Being a systematic procedure to analyze the effect of the response variables, and the controllable factor s that are modified during the execution of the experiment.Within the different strategies of the design of experiments, the factorial design is one of the most widely used. The problem with factorial designs is a large number of experiments that may be ne cessary.It is not convenient to perform the tests of experimental designs in an industrial machine, because it is more difficult to control and measure the variables accurately and in an agile way. Moreover, if an industrial machine has to be used, it is n ot feasible to perform a large number of trials, because it would be necessary to interrupt production.Therefore it was decided to conduct an investigation in which experimental models were obtained in a testing machine that was specially developed for tha t purpose. Later, data were collected from an industrial machine that performed the same process, and with the same machining conditions. The problem to be solved is to what extent the models obtained in the testing machine can be adjusted or not to predic t the process in industrial machines.A study was done by means of regression analysis of the correlation between the valuesobtained in the test machine and those obtained in the industrial machine. It was observed that the trends of roughness parameters gi ven by the models obtained in the testing machine are similar to those obtained in the industrial process. For this reason it is feasible to adapt the models obtained in the testing machine for the industrial machine
dc.format.extent12 p.
dc.language.isoeng
dc.publisherSai Scientific Communications
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria mecànica
dc.subject.lcshMechanical engineering
dc.subject.otherHoning
dc.subject.otherDesign of experiments
dc.subject.otherSurface roughness
dc.subject.otherMaterial removal rate
dc.subject.otherRegression analisys
dc.titleApproximation of An Experimental Model Obtained in A Testing Machine for use in an Industrial Production Machine
dc.typeArticle
dc.subject.lemacEnginyeria mecànica
dc.contributor.groupUniversitat Politècnica de Catalunya. TECNOFAB - Grup de Recerca en Tecnologies de Fabricació
dc.identifier.doi10.20902/IJCTR.2018.111040
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttp://www.sphinxsai.com/2018/ch_vol11_no10/3/(321-332)V11N10CT.pdf
dc.rights.accessOpen Access
local.identifier.drac23525908
dc.description.versionPostprint (published version)
local.citation.authorCoba, M.; Buj, I.; Pearanda, M.
local.citation.publicationNameInternational Journal of ChemTech Research
local.citation.volume11
local.citation.number10
local.citation.startingPage321
local.citation.endingPage332


Fitxers d'aquest items

Thumbnail

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple