Reshaping of large aeronautical structural parts: a simplified simulation approach
Visualitza/Obre
ESAFORM2018_Paper_RM.pdf (2,119Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/124226
Tipus de documentText en actes de congrés
Data publicació2018
EditorAmerican Institute of Physics (AIP)
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Large aeronautical structural parts present important distortions after machining. This problem is caused by the presence of residual stresses, which are developed during previous manufacturing steps (quenching). Before being put into service, the nominal geometry is restored by means of mechanical methods. This operation is called reshaping and exclusively depends on the skills of a well-trained and experienced operator. Moreover, this procedure is time consuming and nowadays, it is only based on a trial and error approach. Therefore, there is a need at industrial level to solve this problem with the support of numerical simulation tools. By using a simplification hypothesis, it was found that the springback phenomenon behaves linearly and it allows developing a strategy to implement reshaping at an industrial level. © 2018 Author(s).
CitacióMena, R., Aguado, J.V., Guinard, S., Huerta, A. Reshaping of large aeronautical structural parts: a simplified simulation approach. A: International ESAFORM Conference on Material Forming. "21st International ESAFORM Conference on Material Forming: Palermo, Italy: april 23-25, 2018: proceedings". American Institute of Physics (AIP), 2018, p. 1-10.
ISBN978-073541663-5
Versió de l'editorhttps://aip.scitation.org/doi/abs/10.1063/1.5034927
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
ESAFORM2018_Paper_RM.pdf | 2,119Mb | Accés restringit |