Current-Mode One-Cycle Control Applied to Linear-Assisted DC/DC Converters

View/Open
Cita com:
hdl:2117/12420
Document typeConference report
Defense date2009
PublisherIEEE Press. Institute of Electrical and Electronics Engineers
Rights accessOpen Access
This work is protected by the corresponding intellectual and industrial property rights.
Except where otherwise noted, its contents are licensed under a Creative Commons license
:
Attribution-NonCommercial-NoDerivs 3.0 Spain
Abstract
This article shows the proposal of an current-mode one-cycle control for linear-assisted DC/DC converters. Linearassisted DC/DC converters are structures that allow to take advantages of the two classic alternatives in the design of power supply systems: voltage linear regulators (classic NPN topology or LDO –low dropout–) and switching DC/DC converters. The current-mode one-cycle control technique is proposed in order to obtain the duty cycle of the linear-assisted converter switch.
The proposed structure can provide an output with suitable load and line regulations. The paper shows the design and simulation results of the proposed current-mode one-cycle linear-assisted converter.
CitationMartinez, H. [et al.]. Current-Mode One-Cycle Control Applied to Linear-Assisted DC/DC Converters. A: IEEE Industrial Electronics Society (IECON). "35th Annual Conference of the IEEE Industrial Electronics Society". Porto/Oporto: IEEE Press. Institute of Electrical and Electronics Engineers, 2009, p. 1-6.
ISBN978-1-4244-4648-3
Collections
- Departament d'Enginyeria de Sistemes, Automàtica i Informàtica Industrial - Ponències/Comunicacions de congressos [1.552]
- EPIC - Energy Processing and Integrated Circuits - Ponències/Comunicacions de congressos [382]
- VIS - Visió Artificial i Sistemes Intel·ligents - Ponències/Comunicacions de congressos [299]
- Departament d'Enginyeria Electrònica - Ponències/Comunicacions de congressos [1.791]
Files | Description | Size | Format | View |
---|---|---|---|---|
~3525401.pdf | 332,4Kb | View/Open |