Structural system identification of shear stiffnesses in beams by observability techniques
Visualitza/Obre
23385850.pdf (593,9Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/121782
Tipus de documentText en actes de congrés
Data publicació2018
EditorInternational Association for Bridge and Structural Engineers (IABSE)
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Despite its importance in some structures, shear deformation is systematically neglected by most static structural system identification methods. To fill this gap, this paper analyzes, for the first time in the literature, the effect of the shear deformation in the inverse analysis of structures. This study is focused on a parametric structural system identification method: the observability technique and it is applied on beams. As the majority of the methods, this technique is based on the Euler-Bernoulli beam theory. The method presented in the literature is unable to identify correctly the characteristics of a structure (such as flexural stiffness) when shear deformation is not negligible. In fact, in this method, the effects of shear deformation are close to those produced by measurement errors. To solve this problem, the observability procedure is updated according to the Timoshenko’s beam theory. This formulation uses an algebraic approach combining both a symbolical and a numerical application. Thus, the updated observability formulation is able to obtain not only flexural stiffness but also shear stiffness. Besides this, for the first time in the literature, a parametric equation of the estimates is obtained. Some examples are presented to illustrate the validity of the new formulation.
CitacióLozano-Galant, J.A., Emadi, S., Ramos, G., Turmo, J. Structural system identification of shear stiffnesses in beams by observability techniques. A: IABSE Symposium. "40th IABSE Symposium Nantes 2018: Tomorrow’s Megastructures". International Association for Bridge and Structural Engineers (IABSE), 2018, p. S24-111-S24-118.
ISBN978-3-85748-161-1
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
23385850.pdf | 593,9Kb | Accés restringit |