Design and experimental implementation of a hysteresis algorithm to optimize the maximum power point extracted from a photovoltaic system
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/121220
Tipus de documentArticle
Data publicació2018-07-17
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
In the several last years, numerous Maximum Power Point Tracking (MPPT) methods for photovoltaic (PV) systems have been proposed. An MPPT strategy is necessary to ensure the maximum power efficiency provided to the load from a PV module that is subject to external environmental perturbations such as radiance, temperature and partial shading. In this paper, a new MPPT technique is presented. Our approach has the novelty that it is a MPPT algorithm with a dynamic hysteresis model incorporated. One of the most cited Maximum Power Point Tracking methods is the Perturb and Observer algorithm since it is easily implemented. A comparison between the approach presented in this paper and the known Perturb and Observer method is evaluated. Moreover, a new PV-system platform was properly designed by employing low cost electronics, which may serve as an academical platform for further research and developments. This platform is used to show that the proposed algorithm is more efficient than the standard Perturb and Observer method.
CitacióPonce de León, N. I., Acho, L., Rodellar, J. Design and experimental implementation of a hysteresis algorithm to optimize the maximum power point extracted from a photovoltaic system. "Energies", 17 Juliol 2018, vol. 11, núm. 7, p. 1866-1-1866-24.
ISSN1996-1073
Versió de l'editorhttp://www.mdpi.com/1996-1073/11/7/1866
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
energies-11-01866.pdf | article | 2,640Mb | Visualitza/Obre |