Power-quality improvement of a stand-alone induction generator using a STATCOM with battery energy storage system
Visualitza/Obre
Cita com:
hdl:2117/12049
Tipus de documentArticle
Data publicació2010-10
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
This paper presents a STATCOM with a self-oscillating bidirectional dc-dc converter for interfacing battery energy storage in a stand-alone induction generator system. The self-oscillation mode is based on relay feedback control with hysteresis. To reduce the output current ripple, an LCL filter is connected between the half bridge of this dc-dc converter and the energy storage system. The other side of bidirectional converter is coupled with a voltage-source converter. The proposed control allows that the previous electronic converters, with an additional resistive dump load, compensate all disturbances in a self-excited induction generator due to three-phase four-wire loads and an improvement of system efficiency. The simulated results show good performance of the stand-alone power system under different loading conditions.
CitacióBarrado, J.; Griño, R.; Valderrama, H. Power-quality improvement of a stand-alone induction generator using a STATCOM with battery energy storage system. "IEEE transactions on power delivery", Octubre 2010, vol. 25, núm. 4, p. 2734-2741.
ISSN0885-8977
Versió de l'editorhttp://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=5560702&tag=1
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Griño.pdf | Article | 901,3Kb | Visualitza/Obre |