Show simple item record

dc.contributorLlorca Piqué, Jordi
dc.contributor.authorCorsaro, Gaetano
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Química
dc.date.accessioned2018-07-30T10:27:10Z
dc.date.available2018-07-30T10:27:10Z
dc.date.issued2018-06-12
dc.identifier.urihttp://hdl.handle.net/2117/120240
dc.description.abstractIn this project, a stainless ste el micro - structured reactor built by a company for the hydrogen production by methane steam reforming i s tested. A nickel based catalyst is prepared through the “incipient wetness technique” and deposited with different methods. The best result is achieved by depositing a pre - formed intermediate layer of alumina on the chromium oxide layer. The reac tor’s performance is compared with a cordierite monolithic reactor filled with the same catalyst t o observe benefits and critical issue. The results obta ined show a production of hydrogen about 20% less than the cordierite reactor
dc.language.isoeng
dc.publisherUniversitat Politècnica de Catalunya
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria química
dc.subject.lcshHydrogen as fuel
dc.subject.lcshMethane
dc.subject.lcshCatalysts
dc.titleCatalytic methani steam reforming in a micro-structured reactor for hydrogen production
dc.typeBachelor thesis
dc.subject.lemacHidrogen -- Producció
dc.subject.lemacCatalitzadors
dc.subject.lemacMetà
dc.identifier.slugETSEIB-240.132871
dc.rights.accessOpen Access
dc.date.updated2018-06-28T08:36:25Z
dc.audience.educationlevelGrau
dc.audience.mediatorEscola Tècnica Superior d'Enginyeria Industrial de Barcelona
dc.description.mobilityIncoming


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Except where otherwise noted, content on this work is licensed under a Creative Commons license: Attribution-NonCommercial-NoDerivs 3.0 Spain