Influence of manganese on the hot working behaviour of construction steels
Tipus de documentArticle
Condicions d'accésAccés restringit per política de l'editorial
The microstructural control of rolled products is based on managing the austenite phase transformations during and after hot deformation to attain the desired microstructure after the cooling step. Therefore, it is very important an appropriate description of the kinetics of the hardening and softening phenomena taking place during the deformation at high temperatures, namely, dynamic recovery (DRV) and recrystallization (DRX). This investigation examines the effect of manganese contents on the hot flow behaviour of plain carbon steels. For this purpose, uniaxial hot compression tests were carried out in carbon steels in an extensive range of temperatures, from 1123 to 1373 K and strain rates, from 5×10-4 to 1×10-1 s-1. This work is focused in determining the physically-based constitutive equations that govern the plastic behaviour of plain carbon steels. Experimental results were compared with the predictions of the model and an excellent agreement over a broad range of temperatures and strain rates was obtained.
CitacióVarela, G.; Cabrera, J.; Prado, J. Influence of manganese on the hot working behaviour of construction steels. "Journal of Advanced Materials Research", 2010, vol. 89-91, p. 580-585.
|Influence of Ma ... of construction steels.pdf||1,555Mb||Accés restringit|