Verification of a numerical model of the offshore wind turbine from the alpha ventus wind farm within OC5 Phase III
Visualitza/Obre
23252082.pdf (4,401Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/119218
Tipus de documentText en actes de congrés
Data publicació2018
EditorAmerican Society of Mechanical Engineers (ASME)
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The main objective of the Offshore Code Comparison Collaboration Continuation, with Correlation (OC5) project, is validation of aero-hydro-servo-elastic simulation tools for offshore wind turbines (OWTs) through comparison of simulated results to the response data of physical systems. Phase III of the OC5 project analyzes the Senvion 5M wind turbine supported by the OWEC Quattropod from the alpha ventus offshore wind farm. This paper shows results of the verification of the OWT models (code-to-code comparison). A subsequent publication will focus on their validation (comparison of simulated results to measured physical system response data). Based on the available data, the participants of Phase III set up numerical models of the OWT in their simulation tools. It was necessary to verify and to tune these models. The verification and tuning were performed against an OWT model available at the University of Stuttgart – Stuttgart Wind Energy (SWE) and documentation provided by Senvion and OWEC Tower. A very good match was achieved between the results from the reference SWE model and models set up by OC5 Phase III participants.
CitacióPopko, W., Huhn, M. L., Robertson, A., Molins, C. Verification of a numerical model of the offshore wind turbine from the alpha ventus wind farm within OC5 Phase III. A: International Conference on Ocean, Offshore and Arctic Engineering. "Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering OMAE2018: June 17-22, 2018, Madrid, Spain". American Society of Mechanical Engineers (ASME), 2018, p. 1-12.
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
23252082.pdf | 4,401Mb | Accés restringit |