Show simple item record

dc.contributor.authorAsef, Pedram
dc.contributor.authorBargalló Perpiñá, Ramón
dc.contributor.authorBarzegaran, M.R.
dc.contributor.authorLapthorn, Andrew
dc.contributor.authorDong, Jianning
dc.contributor.authorMohammed, Osama A.
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica
dc.date.accessioned2018-05-11T09:06:56Z
dc.date.available2018-05-11T09:06:56Z
dc.date.issued2018-01-01
dc.identifier.citationAsef, P., Bargallo, R., Barzegaran, M., Lapthorn, A., Dong, J., Mohammed, O. A comparative study of Quasi-FEA technique on iron losses prediction for permanent magnet synchronous machines. "Progress in electromagnetics research C", 1 Gener 2018, vol. 81, p. 101.
dc.identifier.issn1937-8718
dc.identifier.urihttp://hdl.handle.net/2117/117126
dc.description.abstractThe paper presents an advanced quasi-FEA technique on the iron losses prediction using Bertotti’s iron loss separation models, in which a curve fitting is taken into account for coefficients calculation of each model. Moreover, the skin effect and saturation consideration are applied in order to check the accuracy through the relative error distribution in the frequency domain of each model from low up to high frequencies 50 to 700 (Hz). Additionally, this comparative study presents a torquespeed-flux density computation that is discussed and presented. The iron loss characteristics of a radial flux permanent magnet synchronous machine (PMSM) with closed-slots and outer rotor topology are also discussed. The quasi-finite-element (FE) analysis was performed using a 2-D and 3-D FEA, where the employed quasi-2-D FEA is proposed and compared with 3-D FEA, and along with experimental verifications. Finally, all the iron-loss models under realistic and non-ideal magnetization conditions are verified experimentally on a surface-mounted PMSG for wind generation application.
dc.format.extent1 p.
dc.language.isoeng
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria elèctrica
dc.subject.lcshElectric machines
dc.subject.otherQuasi-FEA technique
dc.subject.otherBertotti’s iron
dc.titleA comparative study of Quasi-FEA technique on iron losses prediction for permanent magnet synchronous machines
dc.typeArticle
dc.subject.lemacMàquines elèctriques
dc.contributor.groupUniversitat Politècnica de Catalunya. EPIC - Energy Processing and Integrated Circuits
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttp://www.jpier.org/PIERC/pierc81/10.17102702.pdf
dc.rights.accessOpen Access
local.identifier.drac22016990
dc.description.versionPostprint (published version)
local.citation.authorAsef, P.; Bargallo, R.; Barzegaran, M.; Lapthorn, A.; Dong, J.; Mohammed, O.
local.citation.publicationNameProgress in electromagnetics research C
local.citation.volume81
local.citation.startingPage101
local.citation.endingPage101


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 Spain
Except where otherwise noted, content on this work is licensed under a Creative Commons license : Attribution-NonCommercial-NoDerivs 3.0 Spain