A comparative study of Quasi-FEA technique on iron losses prediction for permanent magnet synchronous machines
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/117126
Tipus de documentArticle
Data publicació2018-01-01
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
The paper presents an advanced quasi-FEA technique on the iron losses prediction using
Bertotti’s iron loss separation models, in which a curve fitting is taken into account for coefficients calculation of each model. Moreover, the skin effect and saturation consideration are applied in order to check the accuracy through the relative error distribution in the frequency domain of each model from low up to high frequencies 50 to 700 (Hz). Additionally, this comparative study presents a torquespeed-flux density computation that is discussed and presented. The iron loss characteristics of a radial
flux permanent magnet synchronous machine (PMSM) with closed-slots and outer rotor topology are also discussed. The quasi-finite-element (FE) analysis was performed using a 2-D and 3-D FEA, where the employed quasi-2-D FEA is proposed and compared with 3-D FEA, and along with experimental verifications. Finally, all the iron-loss models under realistic and non-ideal magnetization conditions are verified experimentally on a surface-mounted PMSG for wind generation application.
CitacióAsef, P., Bargallo, R., Barzegaran, M., Lapthorn, A., Dong, J., Mohammed, O. A comparative study of Quasi-FEA technique on iron losses prediction for permanent magnet synchronous machines. "Progress in electromagnetics research C", 1 Gener 2018, vol. 81, p. 101.
ISSN1937-8718
Versió de l'editorhttp://www.jpier.org/PIERC/pierc81/10.17102702.pdf
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
10.17102702.pdf | 3,915Mb | Visualitza/Obre |