Show simple item record

dc.contributor.authorDougan, Mark J.
dc.date.accessioned2018-04-11T09:37:42Z
dc.date.available2018-04-11T09:37:42Z
dc.date.issued2018-02
dc.identifier.citationDougan, M. J. Powder metallurgical materials and processes for soft magnetic applications. A: Workshop on SRM drives an alternative for E-traction. "Workshop SRM Drives an Alternative for E‐Traction : Proceedings : February 2, 2018, EPSEVG-UPC Vilanova i la Geltrú (Barcelona) Spain". Vilanova i la Geltrú: Universitat Politècnica de Catalunya. GAECE - Grup d'Accionaments Elèctrics amb Commutació Electrònica, 2018, p. 11-18.
dc.identifier.urihttp://hdl.handle.net/2117/116155
dc.description.abstractFor many designers of electrical machines, the term “soft magnetic materials” automatically means laminated electrical sheet. This is unfortunate, since for many applications, particularly at low frequencies, laminated sheet is rarely the best material choice. Soft magnetic powder materials are available to satisfy the needs of virtually any application imaginable, from plain iron, giving good induction for DC applications, to ultra-high permeability nickel irons. The use of these materials brings with it all the attendant advantages of powder metallurgical (PM) production: low cost, tight tolerances, complicated forms, and minimal material waste. For high frequency applications, a range of soft magnetic composite materials or SMCs are available which can provide magnetic performance comparable to or surpassing that of laminated sheets, while at the same time allowing much greater freedom to the designer due to their isotropic nature, which permits the implementation of complicated 3D flux paths. This paper presents a review of the available powder-based soft magnetic materials, together with typical applications and a consideration of some of the factors which must be taken into account when producing powder-based components for magnetic applications.
dc.format.extent8 p.
dc.language.isoeng
dc.publisherUniversitat Politècnica de Catalunya. GAECE - Grup d'Accionaments Elèctrics amb Commutació Electrònica
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials::Metal·lúrgia
dc.subject.lcshPowder metallurgy
dc.subject.otherSoft magnetic materials
dc.subject.otherPowder metallurgy
dc.subject.otherSinter
dc.subject.otherSMC
dc.subject.otherDielectromagnetic
dc.titlePowder metallurgical materials and processes for soft magnetic applications
dc.typeConference report
dc.subject.lemacPulverimetal·lúrgia
dc.rights.accessOpen Access
local.citation.contributorWorkshop on SRM drives an alternative for E-traction
local.citation.pubplaceVilanova i la Geltrú
local.citation.publicationNameWorkshop SRM Drives an Alternative for E‐Traction : Proceedings : February 2, 2018, EPSEVG-UPC Vilanova i la Geltrú (Barcelona) Spain
local.citation.startingPage11
local.citation.endingPage18


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 Spain
Except where otherwise noted, content on this work is licensed under a Creative Commons license : Attribution-NonCommercial-NoDerivs 3.0 Spain