Show simple item record

dc.contributor.authorMoradi Ghahderijani, Mohammad
dc.contributor.authorCastilla Fernández, Miguel
dc.contributor.authorMomeneh, Arash
dc.contributor.authorMiret Tomàs, Jaume
dc.contributor.authorGarcía de Vicuña Muñoz de la Nava, José Luis
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica
dc.date.accessioned2018-04-06T07:59:56Z
dc.date.available2018-04-06T07:59:56Z
dc.date.issued2018-03-20
dc.identifier.citationMoradi, M., Castilla, M., Momeneh, A., Miret, J., Garcia de Vicuña, J. Analysis, design and implementation of a DC/DC boost resonant-inductor converter with sliding-mode control. "IET power electronics", 20 Març 2018, vol. 11.
dc.identifier.issn1755-4535
dc.identifier.urihttp://hdl.handle.net/2117/115986
dc.description.abstractModern DC-DC resonant converters are normally build around a voltage-source series-resonant converter. This study aims to facilitate the practical use of current-source parallel-resonant converters due to their outstanding properties. To this end, the study presents a sliding-mode control scheme, which provides the following features to the closed-loop system: 1) high robustness to external disturbances and parameter variations and 2) fast transient response during large and abrupt load changes. In addition, a design procedure for determining the values of the control parameters is presented. The theoretical contributions of the paper are experimentally validated by selected tests on a laboratory prototype
dc.language.isoeng
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència::Convertidors de corrent elèctric
dc.subject.lcshPower electronics
dc.subject.lcshDC-to-DC converters
dc.titleAnalysis, design and implementation of a DC/DC boost resonant-inductor converter with sliding-mode control
dc.typeArticle
dc.subject.lemacConvertidors de corrent elèctric
dc.subject.lemacCircuits electrònics -- Alimentador
dc.contributor.groupUniversitat Politècnica de Catalunya. SEPIC - Sistemes Electrònics de Potència i de Control
dc.identifier.doi10.1049/iet-pel.2017.0234
dc.relation.publisherversionhttp://ieeexplore.ieee.org/document/8304897/
dc.rights.accessOpen Access
drac.iddocument22025951
dc.description.versionPostprint (author's final draft)
upcommons.citation.authorMoradi, M.; Castilla, M.; Momeneh, A.; Miret, J.; Garcia de Vicuña, J.
upcommons.citation.publishedtrue
upcommons.citation.publicationNameIET power electronics
upcommons.citation.volume11


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Except where otherwise noted, content on this work is licensed under a Creative Commons license: Attribution-NonCommercial-NoDerivs 3.0 Spain