Show simple item record

dc.contributorBaumann, Henrikke
dc.contributor.authorCañete Vela, Isabel
dc.description.abstractPlastic debris (PD) is one of the biggest pollution problems in the marine environment. Nets, ropes, packaging, and pellets are the most common items that are spread around the world’s oceans causing an impact on wildlife and human health, and economic loss. Although mitigation is tantamount, the question remains for what can be done with the plastics that are already in the oceans. We conducted a literature review of research on debris and plastics waste management. Studies as shown that much of the collected marine debris goes to landfilling because it is little-known, diverse, salty, and too dirty for both incineration and recycling. Also, it showed that there is a strong focus on describing the environmental problems of marine and plastic debris, and that plastic debris is described in natural science terms that the waste management industry cannot use for determining suitable treatments. In order to better translate beach debris data into waste management data, we have collected beach debris from the Swedish West coast and conducted physical and chemical analyses for the characterization of the debris in waste management terms. Based on this data and the literature review, we have identified several recycling options for the PD. To identify environmental pros and cons with the different treatments, we conducted a life cycle assessment (LCA) comparing mechanical, feedstock recycling and energy recovery to establish an appropriate and practical approach towards closing the loop for PD. These treatment options were analysed in the context of two clean-up operations. The analyses suggest that mechanical treatments are not suitable for most plastics (due to they are fragmented, degraded and with a wide range of additives) whereas chemical treatments are suggested as a suitable solution. Feedstock recycling allows the production of raw material, as well as it may have fewer emissions, in comparison with combustion or landfilling which have higher emissions per tonne of PD. Finally, the LCA of two clean-up operations were performed, using the data obtained in the previous processes to see the big picture: observing the ecological benefits of removing this debris, and seeing whether that benefit is juxtaposed according to the recycling option. Although the environmental profits are difficult to quantify, the LCA results suggest that the clean-up process can have a positive impact with both mechanical and feedstock recycling, as long as the operation itself has low emissions (e.g. reducing transport emissions of the volunteers).
dc.publisherUniversitat Politècnica de Catalunya
dc.publisherChalmers University of Technology
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.subjectÀrees temàtiques de la UPC::Enginyeria química
dc.subject.lcshPlastics -- Recycling
dc.subject.lcshBeaches -- Environmental aspects
dc.titleOptions for closing the loop for plastic debris. Environmental analysis of beach clean-up and waste treatments
dc.typeMaster thesis
dc.subject.lemacPlàstics -- Reciclatge
dc.subject.lemacPlatges -- Aspectes ambientals
dc.rights.accessOpen Access
dc.audience.mediatorEscola Tècnica Superior d'Enginyeria Industrial de Barcelona

Files in this item


This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 Spain
Except where otherwise noted, content on this work is licensed under a Creative Commons license : Attribution-NonCommercial-NoDerivs 3.0 Spain