Effect of quenching and partitioning process on a low carbon steel
Visualitza/Obre
Effect of quenching & partitioning process on a low carbon steel.pdf (615,6Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/114157
Tipus de documentArticle
Data publicació2017-05
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Aim of this paper is to analyze the effect of manganese percentages on steel compositions. Laboratory as cast materials, in particular designed for Quenching and Partitioning process (Q&P), are here considered. The considered
steel chemical composition was that of a 0.15C with 1.5Si, two different Mn contents and with no significant Al content. Two-Step Q&P heat treatments were carried out in laboratory by means of dilatometric tests. X-ray
diffraction measurements have been carried out aimed to assess the retained austenite volume fraction. The tensile properties of the quenched and partitioned materials were analyzed. Results showed a marked dependence of
strength, ductility and strain capacity values on heat treatment conditions. In the case of higher austenite contents, higher uniform elongation values were found. Higher tensile properties were found in the case of higher Mn steel
with respect to the lower Mn one. The main novelty of this paper consists in applying Q&P to low carbon (low hardenability steel) showing the effect of such a process on mechanical properties of steels usually adopted for automotive applications.
CitacióDi Schino, A., Di Nunzio, P., Cabrera, J. Effect of quenching and partitioning process on a low carbon steel. "Advanced Materials Letters", Maig 2017, vol. 8, núm. 5, p. 641-644.
ISSN0976-3961
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Effect of quenc ... on a low carbon steel.pdf | 615,6Kb | Accés restringit |