Hardware design and optimization of two-wheeled vehicle robots for a platooning system
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/112183
Tipus de documentTreball Final de Grau
Data2017-06-15
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
This End of Degree Project is centered on the building of a two-wheeled vehicle robot
and the design and programming of current control for its motors. The project continues
the task of three previous works regarding the same type of robot, trying to improve its
hardware optimization and changing the controls.
The first part of the project is a description of the hardware implementation. All the
components are characterized and their circuit schematics are documented and
explained. Current sensors for the motors are designed, calculated and implemented in
order to obtain the signal needed for executing the current control.
The second part explains the model of the vehicle and motors and the control structures
that manage the entire robot. It is focused on the design of the motors control using the
current as the main controlling variable. Some tests are showed to demonstrate the
effectiveness of the controls.
Besides this, a lot of work regarding electronic theorization, building and testing is
realized but not documented on this memory. This is a really practical project and most
of the parts of the process can’t and shouldn’t be explained on paper.
TitulacióGRAU EN ENGINYERIA EN TECNOLOGIES INDUSTRIALS (Pla 2010)
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
TFG_Oriol_Torta.pdf | 1,626Mb | Visualitza/Obre |