Show simple item record

dc.contributor.authorRiba Ruiz, Jordi-Roger
dc.contributor.authorMancini, Antonio-Giuseppe
dc.contributor.authorAbomailek Rubio, Basel Carlos
dc.contributor.authorCapelli, Francesca
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica
dc.date.accessioned2017-10-16T10:52:07Z
dc.date.available2021-10-16T00:28:55Z
dc.date.issued2017-09-11
dc.identifier.citationRiba, J. [et al.]. A 3D-FEM-based model to predict the electrical constriction resistance of compressed contacts. "Measurement", 11 Setembre 2017, vol. 114, p. 44-50.
dc.identifier.issn0263-2241
dc.identifier.urihttp://hdl.handle.net/2117/108715
dc.description.abstractThis work proposes a method to estimate the electrical constriction resistance of two mating metallic rough surfaces based on the finite element method (FEM). The FEM-based method generates a random array of three-dimensional orthogonal parallelepipeds to simulate the stochastic distribution of the asperities across the contact interface. The effect of the contact pressure is studied in detail, since once the contact materials and the topology of the contact area are settled, the contact pressure plays a critical role in determining the electrical constriction resistance. The proposed model is based on two critical variables, the contact pressure and the surface roughness of the mating surfaces, which must be measured in the laboratory to calibrate the model. Results provided by the FEM-based model are compared with experiments for three geometries, thus validating the accuracy of the proposed approach. Although the apparent contact areas of the analyzed specimens have a rectangular shape, the proposed method is also applicable to determine the electrical constriction resistance of other geometries. It is also proved that depending on the pressure applied to the contact interface, the electrical constriction resistance can be almost independent of the apparent area of contact. Although the aim of this work was to generate an electrical constriction resistance model for power connectors, it is also applicable to many other power devices.
dc.format.extent14 p.
dc.language.isoeng
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Energies::Energia elèctrica::Automatització i control de l'energia elèctrica
dc.subjectÀrees temàtiques de la UPC::Matemàtiques i estadística::Anàlisi numèrica::Mètodes en elements finits
dc.subject.lcshElectric resistance
dc.subject.lcshFinite element method
dc.subject.lcshElectric connectors
dc.subject.otherapparent contact area
dc.subject.otherconducting contact area
dc.subject.otherconstriction resistance
dc.subject.otherfinite element method
dc.titleA 3D-FEM-based model to predict the electrical constriction resistance of compressed contacts
dc.typeArticle
dc.subject.lemacResistència elèctrica
dc.subject.lemacElements finits, Mètode dels
dc.subject.lemacConnectors elèctrics
dc.contributor.groupUniversitat Politècnica de Catalunya. MCIA - Motion Control and Industrial Applications Research Group
dc.identifier.doi10.1016/j.measurement.2017.09.003
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttp://www.sciencedirect.com/science/article/pii/S0263224117305602?via%3Dihub
dc.rights.accessOpen Access
local.identifier.drac21555868
dc.description.versionPostprint (author's final draft)
local.citation.authorRiba, J.; Mancini, A.; Abomailek, B.; Capelli, F.
local.citation.publicationNameMeasurement
local.citation.volume114
local.citation.startingPage44
local.citation.endingPage50


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 Spain
Except where otherwise noted, content on this work is licensed under a Creative Commons license : Attribution-NonCommercial-NoDerivs 3.0 Spain