Trajectory generation for unmanned aerial manipulators through quadratic programming
Visualitza/Obre
Cita com:
hdl:2117/108714
Tipus de documentArticle
Data publicació2017-04-01
EditorInstitute of Electrical and Electronics Engineers (IEEE)
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
In this paper a trajectory generation approach using quadratic programming is described for aerial manipulation, i.e. for the control of an aerial vehicle equipped with a robot arm. The proposed approach applies the online active set strategy to generate a feasible trajectory of the joints, in order to accomplish a set of tasks with defined bounds and constraint inequalities. The definition of the problem in the acceleration domain allows to integrate and perform a large set of tasks and, as a result, to obtain smooth motion of the joints. A weighting strategy, associated with a normalization procedure, allows to easily define the relative importance of the tasks. This approach is useful to accomplish different phases of a mission with different redundancy resolution strategies. The performance of the proposed technique is demonstrated through real experiments with all the algorithms running onboard in real time. In particular, the aerial manipulator can successfully perform navigation and interaction phases, while keeping motion within prescribed bounds and avoiding collisions with external obstacles.
Descripció
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
CitacióRossi, R. [et al.]. Trajectory generation for unmanned aerial manipulators through quadratic programming. "IEEE robotics and automation letters", 1 Abril 2017, vol. 2, núm. 2, p. 389-396.
ISSN2377-3766
Versió de l'editorhttp://ieeexplore.ieee.org/document/7762762/
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
1800-Trajectory ... -Quadratic-Programming.pdf | Journal article | 1005,Kb | Visualitza/Obre |