Show simple item record

dc.contributor.authorGarcía Espinosa, Antonio
dc.contributor.authorRiba Ruiz, Jordi-Roger
dc.contributor.authorCusidó Roura, Jordi
dc.contributor.authorOrtega Redondo, Juan Antonio
dc.contributor.authorRomeral Martínez, José Luis
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica
dc.date.accessioned2010-12-17T10:15:55Z
dc.date.available2010-12-17T10:15:55Z
dc.date.created2010-09
dc.date.issued2010-09
dc.identifier.citationGarcia, A. [et al.]. Closed-loop controller for eliminating the contact bounce in DC core contactors. "IEEE transactions on components and packaging technologies", Setembre 2010, vol. 33, núm. 3, p. 535-543.
dc.identifier.issn1521-3331
dc.identifier.urihttp://hdl.handle.net/2117/10667
dc.description.abstractThe undesirable phenomenon of the contact bounce causes severe erosion of the contacts and, as a consequence, their electrical life and reliability are greatly reduced. On the other hand, the bounce of the armature can provoke re-opening of the contacts, even when they have already been closed. This paper deals with the elimination of the bounce in both contacts and armature of a commercial dc core contactor. This is achieved by means of a current closed-loop controller, which only uses as input the current and voltage of the contactor’s magnetizing coil. The logic control has been implemented in a low cost microcontroller. Moreover, the board control can be fed by either dc or ac, and either in 50 Hz or 60 Hz so as to extend its applicability. A set of data is obtained from the measurement of the position and velocity of the movable parts for different operating voltages, and the dynamic behavior of the contactor is discussed.
dc.format.extent9 p.
dc.language.isoeng
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica::Circuits electrònics
dc.subject.lcshElectric circuits
dc.subject.lcshElectric contactors
dc.subject.lcshFuzzy systems
dc.subject.lcshAutomatic control
dc.subject.lcshMicrocontrollers
dc.titleClosed-loop controller for eliminating the contact bounce in DC core contactors
dc.typeArticle
dc.subject.lemacCircuits elèctrics -- Control automàtic
dc.subject.lemacContactors elèctrics
dc.subject.lemacMicrocontroladors
dc.contributor.groupUniversitat Politècnica de Catalunya. MCIA - Motion Control and Industrial Applications Research Group
dc.identifier.doi10.1109/TCAPT.2010.2041456
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttp://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=5491102
dc.rights.accessOpen Access
drac.iddocument4429624
dc.description.versionPostprint (published version)
upcommons.citation.authorGarcia, A.; Riba, J.; Cusido, J.; Ortega, J.; Romeral, J.
upcommons.citation.publishedtrue
upcommons.citation.publicationNameIEEE transactions on components and packaging technologies
upcommons.citation.volume33
upcommons.citation.number3
upcommons.citation.startingPage535
upcommons.citation.endingPage543


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Except where otherwise noted, content on this work is licensed under a Creative Commons license: Attribution-NonCommercial-NoDerivs 3.0 Spain