Inserting curved boundary layers for viscous flow simulation with high-order tetrahedra
Visualitza/Obre
2013-PIMR-GRSP.pdf (3,515Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/105631
Tipus de documentComunicació de congrés
Data publicació2013
EditorSpringer
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
We propose an a posteriori approach for generating curved meshes for viscous flow simulations composed by high-order tetrahedra. The proposed approach is performed in the following three steps: (1) generate a linear tetrahedral mesh for inviscid flow; (2) insert a boundary layer mesh, composed by linear tetrahedra, on the viscous part; and (3) convert the linear tetrahedral mesh to a curved and high-order mesh for viscous flow. This approach provides high-order tetrahedral meshes with boundary layer parts that are composed by elements that are: curved, valid, and of any interpolation degree.
CitacióGargallo, A., Roca, X., Sarrate, J., Peraire, J. Inserting curved boundary layers for viscous flow simulation with high-order tetrahedra. A: International Meshing Roundtable. "Proceedings of the 22nd International Meshing Roundtable: 22nd International Meshing Roundtable (IMR): Orlando, Florida, USA: october 13-16, 2013". Orlando (FL): Springer, 2013, p. 1-5.
ISBN978-3-319-02335-9
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
2013-PIMR-GRSP.pdf | 3,515Mb | Accés restringit |