Mostra el registre d'ítem simple
Manufacturing System Design Based on Axiomatic Design: Case of Assembly Line
dc.contributor.author | Hager, Triki |
dc.contributor.author | Wafik, Hachicha |
dc.contributor.author | Faouzi, Masmoudi |
dc.date.accessioned | 2017-05-16T11:46:39Z |
dc.date.available | 2017-05-16T11:46:39Z |
dc.date.issued | 2017-04 |
dc.identifier.citation | Hager, T.; Wafik, H.; Faouzi, M. Manufacturing System Design Based on Axiomatic Design: Case of Assembly Line. "Journal of Industrial Engineering and Management", Abril 2017, vol. 10, núm. 1, p. 111-139. |
dc.identifier.issn | 2013-0953 |
dc.identifier.uri | http://hdl.handle.net/2117/104502 |
dc.description.abstract | Purpose: In this paper, a combined Production Line Design (PLD) process which includes many design aspects is presented, developed and validated. Design/methodology/approach: The PLD process is based on the SADT (Structured Analysis and Design Technique) diagram and the Axiomatic Design (AD) method. Findings: The results of the validation indicated that the production line designed by this process is outperformed the initial line of the company. Practical implications: For a purpose of validation, this proposed process has been applied in a manufacturing company and it has been validated by simulation. Originality/value: Recently, the problems of production line design (PLD) have attracted the attention of many researchers. However, only a few studies have treated the PLD which includes all design aspects. In this work, a combined PLD porcess is presented. It should be noted that the proposed process is simple and effective. |
dc.format.extent | 29 p. |
dc.language.iso | eng |
dc.publisher | OmniaScience |
dc.rights | Attribution-NonCommercial 3.0 Spain |
dc.rights.uri | http://creativecommons.org/licenses/by-nc/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Economia i organització d'empreses::Direcció d'operacions |
dc.subject.lcsh | Assembly-line methods |
dc.subject.lcsh | Production control |
dc.subject.other | Production line design |
dc.subject.other | Assembly line |
dc.subject.other | Axiomatic design |
dc.subject.other | SADT |
dc.subject.other | Configuration |
dc.subject.other | Performance |
dc.title | Manufacturing System Design Based on Axiomatic Design: Case of Assembly Line |
dc.type | Article |
dc.subject.lemac | Treball en cadena |
dc.subject.lemac | Producció -- Control |
dc.identifier.doi | 10.3926/jiem.728 |
dc.identifier.dl | B-28744-2008 |
dc.description.peerreviewed | Peer Reviewed |
dc.rights.access | Open Access |
local.citation.publicationName | Journal of Industrial Engineering and Management |
local.citation.volume | 10 |
local.citation.number | 1 |
local.citation.startingPage | 111 |
local.citation.endingPage | 139 |