Show simple item record

dc.contributor.authorAlvaredo, P
dc.contributor.authorRoa Rovira, Joan Josep
dc.contributor.authorJiménez Piqué, Emilio
dc.contributor.authorLlanes Pitarch, Luis Miguel
dc.contributor.authorGordo Odériz, Elena
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica
dc.date.accessioned2017-05-05T11:24:55Z
dc.date.available2017-05-05T11:24:55Z
dc.date.issued2017-02-01
dc.identifier.citationALVAREDO, P., Roa, J.J., Jimenez-Pique, E., Llanes, L., GORDO, E. Characterization of interfaces between TiCN and iron-base binders. "International journal of refractory metals and hard materials", 1 Febrer 2017, vol. 63, p. 32-37.
dc.identifier.issn0263-4368
dc.identifier.urihttp://hdl.handle.net/2117/104121
dc.description.abstractThis work includes a study of the interface between matrix and reinforcement in Fe-Ti(C,N) systems. A study of wettability and solubility between metal and ceramic phases is first performed. It combines wetting experiments at high temperature with kinetics simulation. In doing so, dense Ti(C,N) is produced by spark plasma sintering and used as substrate. On the other hand, Fe, Fe-WC and Fe-Mo2C alloys are used as metal matrix to evaluate the influence of WC and Mo2C carbides on the formation, composition and properties of the interface. These experiments are complemented by a micromechanical study of the interface. Hardness and elastic modulus are obtained from analysis of nanoindentation arrays in the matrix and into the reinforcement for each system. The sliding contact response at the interface (and neighboring regions) is evaluated by cross-section nanoscratches conducted at different load levels.
dc.format.extent6 p.
dc.language.isoeng
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials::Metal·lúrgia
dc.subjectÀrees temàtiques de la UPC::Física
dc.subject.lcshNonlinear systems
dc.titleCharacterization of interfaces between TiCN and iron-base binders
dc.typeArticle
dc.subject.lemacSistemes no lineals
dc.contributor.groupUniversitat Politècnica de Catalunya. CIEFMA - Centre d'Integritat Estructural, Fiabilitat i Micromecànica dels Materials
dc.identifier.doi10.1016/j.ijrmhm.2016.08.010
dc.relation.publisherversionhttp://www.sciencedirect.com/science/article/pii/S0263436816300403
dc.rights.accessOpen Access
local.identifier.drac19748609
dc.description.versionPostprint (author's final draft)
local.citation.authorAlvaredo, P.; Roa, J.J.; Jimenez-Pique, E.; Llanes, L.; Gordo, E.
local.citation.publicationNameInternational journal of refractory metals and hard materials
local.citation.volume63
local.citation.startingPage32
local.citation.endingPage37


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record