Characterization of interfaces between TiCN and iron-base binders
Visualitza/Obre
10.1016/j.ijrmhm.2016.08.010
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/104121
Tipus de documentArticle
Data publicació2017-02-01
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This work includes a study of the interface between matrix and reinforcement in Fe-Ti(C,N) systems. A study of wettability and solubility between metal and ceramic phases is first performed. It combines wetting experiments at high temperature with kinetics simulation. In doing so, dense Ti(C,N) is produced by spark plasma sintering and used as substrate. On the other hand, Fe, Fe-WC and Fe-Mo2C alloys are used as metal matrix to evaluate the influence of WC and Mo2C carbides on the formation, composition and properties of the interface. These experiments are complemented by a micromechanical study of the interface. Hardness and elastic modulus are obtained from analysis of nanoindentation arrays in the matrix and into the reinforcement for each system. The sliding contact response at the interface (and neighboring regions) is evaluated by cross-section nanoscratches conducted at different load levels.
CitacióALVAREDO, P., Roa, J.J., Jimenez-Pique, E., Llanes, L., GORDO, E. Characterization of interfaces between TiCN and iron-base binders. "International journal of refractory metals and hard materials", 1 Febrer 2017, vol. 63, p. 32-37.
ISSN0263-4368
Versió de l'editorhttp://www.sciencedirect.com/science/article/pii/S0263436816300403
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
characterization_class.pdf | 516,9Kb | Visualitza/Obre |