Show simple item record

dc.contributor.authorRius Rueda, Armand
dc.contributor.authorGarcía Espinosa, Antonio
dc.contributor.authorDíaz Millán, Manuel Alberto
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Mecànica
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica
dc.date.accessioned2017-03-16T14:32:20Z
dc.date.available2017-03-16T14:32:20Z
dc.date.issued2017
dc.identifier.citationRius, A., Garcia, A., Díaz, M. A. Optimization of modular wiring harnesses by means of regression models for temperature prediction of wire bundles. A: Simulation and Testing for Vehicle Technology. "Simulation and Testing for Vehicle Technology: 7th Conference, Berlin, May 12-13, 2016". Springer, 2017, p. 361-373.
dc.identifier.isbn978-3-319-32344-2
dc.identifier.urihttp://hdl.handle.net/2117/102597
dc.description.abstractAutomotive wiring harnesses have become heavier and more complex due to their increasing number of electrical components. It is now desired to reduce their mass of copper. For this purpose, experimentation can be partially replaced by simulation, but it is still impossible to exhaustively simulate all of the combinations of modular wiring harness. This proposed approach consists of carrying out simulations using the FEM method and using their results to create regression models. Polynomial formulae can give the same information as simulations within a clearly reduced time and satisfying accuracy. An optimization algorithm introduced in this study will use them to assign new cable cross-sections of harnesses considering their currents and the ambient temperature.
dc.format.extent13 p.
dc.language.isoeng
dc.publisherSpringer
dc.subjectÀrees temàtiques de la UPC::Enginyeria elèctrica::Maquinària i aparells elèctrics
dc.subject.lcshElectric wire
dc.subject.lcshFinite element method
dc.subject.lcshAutomobiles--Electric wiring
dc.subject.lcshMathematical optimization
dc.subject.otherwire harness optimization
dc.subject.otherweight reduction regression models
dc.subject.othertemperature prediction
dc.titleOptimization of modular wiring harnesses by means of regression models for temperature prediction of wire bundles
dc.typeConference report
dc.subject.lemacCables elèctrics
dc.subject.lemacElements finits, Mètode dels
dc.subject.lemacAutomòbils -- Equip elèctric
dc.subject.lemacOptimització matemàtica
dc.contributor.groupUniversitat Politècnica de Catalunya. MCIA - Motion Control and Industrial Applications Research Group
dc.identifier.doi10.1007/978-3-319-32345-9_24
dc.rights.accessOpen Access
drac.iddocument19748947
dc.description.versionPostprint (author's final draft)
upcommons.citation.authorRius, A., Garcia, A., Díaz, M. A.
upcommons.citation.contributorSimulation and Testing for Vehicle Technology
upcommons.citation.publishedtrue
upcommons.citation.publicationNameSimulation and Testing for Vehicle Technology: 7th Conference, Berlin, May 12-13, 2016
upcommons.citation.startingPage361
upcommons.citation.endingPage373


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder