A new MPPT method for low-power solar energy harvesting
Visualitza/Obre
Cita com:
hdl:2117/10122
Tipus de documentArticle
Data publicació2010-09
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
This paper describes a new maximum-power-pointtracking
(MPPT) method focused on low-power (< 1 W) photovoltaic
(PV) panels. The static and dynamic performance is
theoretically analyzed, and design criteria are provided. A prototype
was implemented with a 500-mW PV panel, a commercial
boost converter, and low-power components for the MPPT
controller. Laboratory measurements were performed to assess
the effectiveness of the proposed method. Tracking efficiency was
higher than 99.6%. The overall efficiency was higher than 92% for
a PV panel power higher than 100 mW. This is, in part, feasible
due to the low power consumption of the MPPT controller, which
was kept lower than 350 μW. The time response of the tracking
circuit was tested to be around 1 s. Field measurements showed
energy gains higher than 10.3% with respect to a direct-coupled
solution for an ambient temperature of 26 ◦C. Higher gains are
expected for lower temperatures.
CitacióLopez-Lapeña, O.; Penella, M.; Gasulla, M. A new MPPT method for low-power solar energy harvesting. "IEEE transactions on industrial electronics", Setembre 2010, vol. 57, núm. 9, p. 3129-3138.
ISSN0278-0046
Versió de l'editorhttp://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=5345741&tag=1
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
05345741.pdf | Article revista IEEE | 764,6Kb | Visualitza/Obre |