Mostra el registre d'ítem simple
Predictive model for polishing times in mould finishing
dc.contributor.author | González Rojas, Hernán Alberto |
dc.contributor.author | Travieso Rodríguez, José Antonio |
dc.contributor.author | Llumà Fuentes, Jordi |
dc.contributor.author | Jorba Peiró, Jordi |
dc.contributor.author | Sánchez Egea, Antonio J. |
dc.date.accessioned | 2014-07-14T13:05:01Z |
dc.date.available | 2014-07-14T13:05:01Z |
dc.date.issued | 2013-12 |
dc.identifier.citation | González Rojas, Hernan Alberto [et al.]. Predictive model for polishing times in mould finishing. A: Jornades de recerca EUETIB. "Jornades de recerca EUETIB". Barcelona: EUETIB, 2013, p. 107-115. |
dc.identifier.isbn | 9788469599228 |
dc.identifier.uri | http://hdl.handle.net/2099/14978 |
dc.description.abstract | El pulido, proceso final utilizado en la producción de piezas, es a menudo lento y se aplica manualmente. Normalmente define la rugosidad superficial y la precisión de la pieza. Se lleva a cabo utilizando partículas duras para producir la abrasión de la superficie de la pieza a pulir. En este documento se propone un modelo para predecir el progreso del frente de pulido. El modelo tiene en cuenta la topografía resultante antes de la mecanización a través de su curva de Abbott - Firestone, la velocidad relativa del material abrasivo, la fuerza aplicada, el material de la pieza y el tamaño de los granos abrasivos. Separa las aportaciones realizadas por el material de la pieza y el tipo abrasivo de la topografía previa. También muestra los valores recomendados para los diferentes parámetros de proceso a ser utilizados en la predicción de la evolución del frente de pulido en algunos materiales. Además se estima el tiempo de pulido necesario para eliminar completamente la topografía resultante del fresado utilizando una estrategia de perforación transversal. Por último, se muestra la predicción del modelo del frente de pulido, lo que confirma que el mecanismo de abrasión caracteriza dicho proceso. |
dc.description.abstract | Polishing, the final process used in the production of parts, is often slow and often applied manually. It normally defines the surface roughness and part accuracy. It is performed using hard particles to produce abrasion of the workpiece surface to be polished. In this paper a model for predicting the progress of the polishing face is proposed. The model considers the topography resulting from prior mechanizing through its Abbott-Firestone curve, the relative speed of the abrasive material, the applied force, the workpiece material and the size of the abrasive grains. It separates the contributions made by the workpiece material and the abrasive type from the prior topography. It also shows recommended values for different process parameters to be used in predicting the evolution of the polishing front in some materials. Additionally, the polishing time required to completely remove the topography that results from ball milling using a cross drilling strategy is estimated. Finally, the model's correct prediction of the polished front is shown, confirming that the abrasion mechanism characterizes the sandpaper polishing process. |
dc.format.extent | 9 |
dc.language.iso | eng |
dc.publisher | EUETIB |
dc.relation.ispartof | Jornades de recerca EUETIB |
dc.rights | Attribution-NonCommercial-NoDerivs 3.0 Spain |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Enginyeria dels materials |
dc.subject | Àrees temàtiques de la UPC::Enginyeria mecànica |
dc.subject.lcsh | Surface preparation |
dc.subject.lcsh | Grinding and polishing |
dc.subject.other | modelo de pulido, la tasa de eliminación de material, Abbott-Firestone, topografía superficial, abrasión |
dc.subject.other | polishing model, material removal rate, Abbott-Firestone, surface topography, abrasion |
dc.title | Predictive model for polishing times in mould finishing |
dc.type | Conference lecture |
dc.subject.lemac | Esmerilament |
dc.subject.lemac | Superfícies -- Tractament |
dc.description.peerreviewed | Peer Reviewed |
dc.rights.access | Open Access |
local.citation.author | González Rojas, Hernan Alberto; Travieso Rodriguez, Jose Antonio; Llumà Fuentes, Jordi; Jorba Peiró, Jordi; Sánchez Egea, Antonio J. |
local.citation.contributor | Jornades de recerca EUETIB |
local.citation.pubplace | Barcelona |
local.citation.publicationName | Jornades de recerca EUETIB |
local.citation.startingPage | 107 |
local.citation.endingPage | 115 |