Characterization of ball-burnishing vibration-assisted process
Document typeConference lecture
Defense date2013-12
PublisherEUETIB
Rights accessOpen Access
Except where otherwise noted, content on this work
is licensed under a Creative Commons license
:
Attribution-NonCommercial-NoDerivs 3.0 Spain
Abstract
Este trabajo está dirigido al estudio del proceso de bruñido con bola asistido por una vibración. Se parte de considerar que dicha vibración ayudará al proceso, facilitando la deformación que se produce sobre la superficie de trabajo. Dado que no existe una herramienta similar en el mercado, con el fin de realizar el estudio, ha sido necesario diseñar, caracterizar y fabricar una herramienta capaz de realizar el proceso de bruñido con bola asistido, teniendo en cuenta los componentes fundamentales que intervienen en dicho diseño y el modelo físico que caracteriza la operación. Bajo estos criterios, la caracterización de la operación de la herramienta también se realiza mediante la evaluación de la rugosidad de la superficie que queda después de que ocurre el proceso. Para la validación experimental se han utilizado piezas de trabajo de aluminio y de acero. Estos resultados se compararon con los obtenidos por la misma herramienta sin utilizar vibraciones. Los resultados de rugosidad que resultan del bruñido con bola asistido, mejoran con respecto a los obtenidos utilizando el proceso sin asistencia, en ambos materiales ensayados. First of all, this work refers to the study of the ball-burnishing process assisted by a vibration. It starts by considering that this vibration helps to make the development of this finishing process easier, because it helps to deform the workpiece material more easily. Since there is no similar tool on the market, in order to conduct the study, it has been necessary to design, characterize and manufacture a tool that can perform the process, taking into account the critical components that are involved in the design, and the physical model characterizing the operation. Under these criteria, the characterization of the tool operation is also done by evaluating the surface roughness that remains after the process occurs. For experimental validation have been used workpieces of aluminium and steel. These results are compared to those obtained by the same tool without using vibration. Roughness results obtained using the ball-burnishing vibration-assisted process improves with respect to those obtained using the process without assistance, in both materials tested.
CitationGómez-Gras, Giovanni [et al.]. Characterization of ball-burnishing vibration-assisted process. A: "". Barcelona: EUETIB, 2013, p. 91-100.
ISBN9788469599228
Files | Description | Size | Format | View |
---|---|---|---|---|
Characterizatio ... ation-assisted process.pdf | 797,4Kb | View/Open |