Numerical model for simulating surface roughness in honing process
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2099.1/22314
Tipus de documentTreball Final de Grau
Data2013-06
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
In this first part of the project, state-of-art regarding modelling of machining processes with abrasive stones was studied. In the second part of the project, a numerical model was developed o simalte the surface topography to be obtained in a honinh process, as a function of honing parameters like grain, size, linear speed, tangential speed, etc. In the present model, only one grain having a simple shape was considered. The analytical trajectory of the grain was determined as a result of both constant rotating and reciprocating movement of the honing head. Then, numerical calulations were performed or determine the material that is removed by the abrasive grain form a block of material corresponding to workpiece. From these calculations, surface topography of the block material was obtained and main roughness parameters, both in 2 and 3 dimensions, were calculated.
MatèriesHoning -- Simulation methods, Machine-tools, Grinding wheels, Numerical analysis, Brunyiment -- Mètodes de simulació, Màquines-eines, Moles (Tecnologia), Anàlisi numèrica
ProvinençaAquest document conté originàriament altre material i/o programari no inclòs en aquest lloc web
TitulacióMOBILITAT INCOMING
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Report_UPC.pdf | Report | 998,3Kb | Visualitza/Obre |