Silicone Rubber as Precursor in the Manufacturing of Zirconia Composite Materials with Complex Hierarchy
Visualitza/Obre
Report (16,77Mb) (Accés restringit)
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2099.1/21301
Tutor / directorFleck, Claudia
Tipus de documentProjecte/Treball Final de Carrera
Data2013
Condicions d'accésAccés restringit per decisió de l'autor
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This project consists on developing and testing a new technique of manufacturing ceramic materials. This technique is based on building alternated silicone rubber layers reinforced with zirconia in order to create a resistant ceramic material for various applications.
On the first part of this project, several different samples will be created and tested. First of all, layers with different amounts of zirconia (3Y) alternated, and then metal compounds and thin cover-slips will be integrated in the samples to reinforce them even more. These
samples will be tested and observed thoroughly under metallographic preparation of cross section, digital microscope, mechanical stresses and scanning electron microscopy to prove their resistance and observe their structure and composition.
On the second part, a different type of zirconia (8Y) will be used to build new samples and compare them to the ones build before. Finally, this technique will be compared to another one developed before in this project, electrophoretic deposition (EPD).
Este proyecto consiste en desarrollar y testar una nueva técnica de fabricar materiales cerámicos.
Esta técnica está basada en crear láminas alternadas de silicona reforzadas con circonia con el fin de construir un material cerámico resistente para diferentes aplicaciones.
En la primera parte del proyecto, se crearan y examinarán diferentes muestras. Primeramente láminas alternadas con diferente porcentaje de circonia (3Y) y después se les integrarán componentes metálicos y finas láminas de cubreobjetos para reforzarlos aún más. Estás muestras
serán sometidas a diferentes pruebas, como metalografía, esfuerzos mecánicos, se observarán en microscopio digital y microscopio de escáner de electrones, para observar su estructura y composición y medir su resistencia.
En la segunda parte, se utilizará otro tipo de circonia (8Y) para crear nuevas muestras y
compararlas con las anteriores. Por último se comparará esta técnica de láminas de silicona con otra anteriormente desarrollada basada en deposiciones electroforéticas (EPD).
MatèriesCeramic materials, Zirconium – Testing, Composite materials, Gums and resins, Materials ceràmics, Zirconi -- Proves, Materials compostos, Gomes i resines
TitulacióENGINYERIA QUÍMICA (Pla 2000)
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Jon_Serrano_Cuevas_Proyecto.pdf | Report | 16,77Mb | Accés restringit |