Desarrollo de sistemas broadcast para portabilidad
Tutor / directorGarcía Lozano, Mario
Document typeBachelor thesis
Rights accessRestricted access - author's decision
The aim of this project is to plan the different parameters of the DVB-T2 standard following step by step the regulations of the ITU-R BT.2254 Report, which talks about frecuency and network planning aspects of DVB-T2. Subsequently, some of the main parameters in DVB-T2 are measured and the results will be compared with the regulation. Differences between them will be performed . Our project has been done following Abertis Telecom methodology. The main sections are presented below: 1.- Description of the DVB-T2 standard and comparison with the previous standard DVB-T. The novelties will be explained. 2.- Analysis of the measures that can guarantee a level of coverage and avoid interferences with other RF systems. 3.- Network DVB-T2 planning: · Reception modes. · Election of configured DVB-T2 parameters. · Link Budget calculation for each kind of reception method. 4.- Simulation f different deployment scenarios: · Coverage studies for every analyzed reception method. · Studies on the coverage degradation for an application in a real case. · Study of echos from the network itself (self-interference). 5.- Measurements of: · C/N deterioration and height loss. · Variation and degradation of the quality metric MER. 6.- Conclusions and future lines of work.
DegreeENGINYERIA TÈCNICA DE TELECOMUNICACIÓ, ESPECIALITAT EN SISTEMES DE TELECOMUNICACIÓ (Pla 2000)
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder