Radiological incident monitoring through UAS vehicles
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2099.1/18014
Tipus de documentTreball Final de Grau
Data2013-01-21
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-CompartirIgual 3.0 Espanya
Abstract
In some cases there are dangerous situations where before to send an human team to the site would be better have information about the current situation to improve the equipment of the this team. Examples of these situations are the radiological incidents. The system design in this project lets to the control center gets specific information about the situation through the UAV. The system consists in a sensor board network at the points of interest that collect data and the function of the UAV is overflies these sensor boards and get the data collected to send them to the control center. To design this system the project has considered de currents radiological emergencies protocols. The project implements the system in the nuclear plant of Ascó, in Tarragona, so the protocol followed in the PENTA from BOE. Other aspects that work the project are the communication capacity of the links between different devices and the transmission protocol to transfer the data between the devices. Also, in this project has implemented an interface to control all the system, through which it the control center can transmit commands to UAV and receive data from UAV. En alguns casos hi han situacions perilloses on, abans d’enviar un equip humà al lloc per treballar-hi, seria millor tenir informació sobre l’escenari, de manera que aquest equip es pogués prepara millor. Un exemple d’aquestes situacions són els incidents radiològics.
El sistema dissenyat en aquest projecte permet al centre de control obtenir
informació específica sobre la situació a través d’un UAV. El sistema consisteix
en una xarxa de sensors en els punts d’interès que recullen les dades
requerides per enviar-les al centre de control.
Per dissenyar aquest sistema s’ha tingut en compte els protocols a seguir en
incidents nuclears. El projecte implementa el sistema a la central nuclear
d’Ascó, a Tarragona, on el protocol a seguir definit pel BOE és el PENTA.
Altres aspectes que treballa aquest projecte són la capacitat dels diferents
enllaços de comunicació entre els diferents dispositius i el protocol de
transferència de dades entre aquests.
També, s’ha implementat una interface per controlar tot el sistema, a través de
la qual el centre de control podrà transmetre comandes cap a l’UAV i rebre
dades des de aquest.
TitulacióENGINYERIA TÈCNICA DE TELECOMUNICACIÓ, ESPECIALITAT EN SISTEMES DE TELECOMUNICACIÓ (Pla 2000)
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
memoria.pdf | 3,030Mb | Visualitza/Obre |