Show simple item record

dc.contributorQi, Haying
dc.contributor.authorVergés Mont, Jaume
dc.contributor.otherEscola Tècnica Superior d'Enginyeria Industrial de Barcelona. Mobilitat
dc.date.accessioned2012-04-30T16:25:19Z
dc.date.available2012-04-30T16:25:19Z
dc.date.issued2011
dc.identifier.urihttp://hdl.handle.net/2099.1/15151
dc.description.abstractThis document reports the different activities conducted during one semester at the Department of Thermal Engineering of Tsinghua Unversity. This thesis is structured in two different parts because an experimental and numerical study has been performed. Firstly, an experimental study on an initially uniformly distributed nano-particle two-phase flow after passing through a contraction jet has been carried. The study includes a brief review on the state-of-the-art of the nano-particle flow research and the need of further experimental results to develop new results. Using a scanning mobility particle sizer, the study analyses the experimental procedures to ensure the validity of the results obtained. During the experimental work, several conclusions have been reached. This conclusions allow to simplifiy the data acquisition procedures. On top of that, the influence of concentration on the coagulation of nano-particles has also been confirmed. Secondly, a numerical simulation study has been carried to evaluate the properties of an impinging mixer. The main goal was to compare the mixing process between two inlet opposed anular gaseous flows (methane and air) and a mixer with an single anular inlet flow. On top of that, different geometries have been analysed and a the influence of each parameter has been identified.
dc.language.isoeng
dc.publisherUniversitat Politècnica de Catalunya
dc.publisherTsinghua University
dc.subjectÀrees temàtiques de la UPC::Física::Física de fluids::Flux de fluids
dc.subject.lcshTwo-phase flow -- Models matemàtics
dc.subject.lcshNanoparticles
dc.subject.lcshMethane -- Analysis
dc.subject.lcshGases -- Separation
dc.titleStudy of nano-particle multi-phase flow and mixing process of air and fuel
dc.typeMaster thesis (pre-Bologna period)
dc.subject.lemacFluix bifàsic -- Models matemàtics
dc.subject.lemacNanopartícules
dc.subject.lemacMetà -- Anàlisi
dc.subject.lemacGasos -- Separació
dc.rights.accessRestricted access - author's decision
dc.audience.educationlevelEstudis de primer/segon cicle
dc.audience.mediatorEscola Tècnica Superior d'Enginyeria Industrial de Barcelona


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder