Recent Submissions

  • Numerical investigation of the mixing and combustion in a partially premixed swirl-stabilized hydrogen flame 

    Forck, Jonathan (Universitat Politècnica de Catalunya, 2021-05-14)
    Master thesis
    Restricted access - author's decision
    Covenantee:   Barcelona Supercomputing Center / Technische Universität Berlin
    In this thesis the results of mixing and combustion simulations with the premixed famelet method are presented and discussed. They were obtained by large-eddy simulations of a technically premixed swirl-stabilized hydrogen ...
  • Visual control for fine grasping of deformable objects 

    Furlan, Serena (Universitat Politècnica de Catalunya, 2021-11-01)
    Master thesis
    Open Access
    Covenantee:   Institut de Robòtica i Informàtica Industrial
    This Master Thesis aims to investigate and assess different grasping strategies to allow a robot to grasp folded textiles. In general, the difficulty of the problem of grasping textiles is due to the variety of possible ...
  • Project Management: The different Methodologies on how to manage Projects of private and public Institutions 

    Mandel, Henning (Universitat Politècnica de Catalunya, 2020-10-29)
    Tutored research work
    Restricted access - author's decision
    The following text focuses on the differences between Project Management methodologies and activities in private companies and public institutions. The approaches are described with examples and explanations. The report ...
  • Numerical simulations of heat and mass transfer phenomena applied to flat-plate solar collectors 

    Nervo, Edoardo (Universitat Politècnica de Catalunya, 2020-07-09)
    Master thesis
    Restricted access - author's decision
    Numerical methods and simulations in fluid dynamics and Heat Transfer (HT) are constantly growing in terms of number of both courses offered at universities and active researches in the field. Nowadays, Computational Fluid ...
  • Estudio de eficiencia energética. 

    Faverjon, Samuel (Universitat Politècnica de Catalunya, 2020-07-07)
    Tutored research work
    Open Access
    Covenantee:   CDEI-DM - Centre de Disseny d'Equips Industrials-Dinàmica de Màquines
  • Web crippling in deep trapezoidal sheeting 

    Sánduly, Annabella (Universitat Politècnica de Catalunya, 2020-07-30)
    Master thesis
    Open Access
    The analytical calculation of web crippling resistance according to Eurocode 3, Part 1-3 is a problem nowadays, because the results are very different from the results of the experimental tests. The numerical calculation ...
  • Control Predictivo de Fallos de un Motor DC 

    Pierucci, Eva (Universitat Politècnica de Catalunya, 2020-09-03)
    Tutored research work
    Restricted access - author's decision
  • Study of Mask projections of slicing techniques in polar coordinates for 3D printing 

    Siddavatam, Narendra Reddy (Universitat Politècnica de Catalunya, 2020-07-02)
    Tutored research work
    Restricted access - author's decision
    This Research Assingnment was done in School of Industrial Engineering of Barcelona (ETSEIB) -UPC,Barcelona. I would like to thank UPC Barcelona for giving opportunity to do research work in a subject which greatly interests ...
  • Re-design of a biomedical device for manufacturing it via 3D printing 

    Challa, Pritam Reddy (Universitat Politècnica de Catalunya, 2020-07-02)
    Tutored research work
    Restricted access - author's decision
    Covenantee:   Amrita Vishwa Vidyapeetham
  • Study on the Volumetric Taxonomy for Slicing techniques for 3D printing in polar coordinates 

    Namburi, Leela Deepak (Universitat Politècnica de Catalunya, 2020-07-02)
    Tutored research work
    Restricted access - author's decision
    Additive manufacturing or 3D printing is one of the current emerging technologies with most potential in manufacturing. And each improvement in AM techniques can lead to big upgrades in terms of productivity. The present ...
  • Control de la Presión en Redes de Distribución de Agua Potable 

    Eygonnet, Florian (Universitat Politècnica de Catalunya, 2020-07-31)
    Tutored research work
    Open Access
    En este trabajo se estudiarán diferentes estrategias, y en particular una estrategia llamada híbrida, para el control de presión en redes de distribución. Tenemos una canalización que contiene una válvula que se puede abrir ...
  • Control of transients in water distribution networks 

    Perolini Castellsague, Jonas (Universitat Politècnica de Catalunya, 2020-07-31)
    Tutored research work
    Restricted access - author's decision
    In this thesis, the pressure control in water distribution networks are discussed. First, the importance of efficient pressure control in water distribution networks as well as different pressure control methods are ...

View more