Entwurf und Konstruktion einer Prüfvorrichtung zur Untersuchung von Kunststoffzahnrädern für einen Ölpumpenantrieb
Tutor / director / evaluatorFürstenberger, Matthias
Document typeMaster thesis (pre-Bologna period)
Rights accessRestricted access - author's decision
The noise behaviour of a single stage spur gear should be optimized with regard to the development of automatic transmission. The gear stage id used to drive an oil pump in an automatic transmission, which provides the required flow for the hydraulic control system. For the optimization of the spur oil pump drive gear with respect to the gear howling noise, the use of alternative Materials, specially plastics, has to be researched. The changes should verify the lifespan using prototypes in life-tests. For that purpose a testing device should be designed, constructed and built as well as to define the load runs, to carry out the tests and to interpret the results. In addition, the coustic optimization can be demonstrated and evaluated on the test bench and in the vehicle. The key objectives of the task are: Designn, construction and assembly of a testing device. Search and establishment of alternative materials, specially plastics. Design and manufacture of prototypes. Implementation of acoustic tests and life tests. Documentation.
SubjectsGear pumps, Gearing -- Noise, Plastics -- Testing, Bombes d'engranatge, Engranatges -- Soroll, Plàstics -- Proves
ProvenanceAquest document conté originàriament altre material i/o programari no inclòs en aquest lloc web
|Diplomarbeit_Bou Romanmo.pdf||Report||11,63Mb||Restricted access|