Calibration of an optical probe
Visualitza/Obre
Report (19,01Mb) (Accés restringit)
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2099.1/11225
Tutor / directorMcCluskey, Franci
Tipus de documentProjecte/Treball Final de Carrera
Data2009
Condicions d'accésAccés restringit per decisió de l'autor
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The aim of the experiment is to calibrate a monofiber optical probe, used in two phase gas-liquid flow, to a speed of 40 m/s. To measure the bubble velocity, the optical probe requires calibration. This procedure consists of measuring the rise time of signals of stable bubbles that are released into a flow of pressurized water through a horizontal tube of inner diameter 6 mm. The shape of the bubble tip is recorded by a camera and the advance speed of the bubbles is measured by two laser gates placed along the tube and separed by a distance d. The optical probe signals were correlated with these measurements.
TitulacióENGINYERIA INDUSTRIAL (Pla 1994)
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Calibration of an optical probe.pdf | Report | 19,01Mb | Accés restringit |