Analysis and manufacturing of a piston by using mechanical high-precision micromachining
Visualitza/Obre
Report (40,81Mb) (Accés restringit)
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2099.1/10852
Tutor / directorMassimiliano, Annoni
Tipus de documentProjecte/Treball Final de Carrera
Data2009
Condicions d'accésAccés restringit per decisió de l'autor
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
I'm required to fabricate a piston of 2mm diameter for carring out an experiment to learn more about the fenomenon called adhesion. So I must decide which is the suitable strategy and tools (buy new tools if it's necessary) required to manufacture the piston, manufacture the piston by my own using a CNC machione, this includes learning completely how it works the CNC. And after make a revision if the tolerance and superficial quality required is reached and also make a comparation with the same piston but manufacturated by using an electroerosion machine (EDM). The dificulty lies in reaching this high precision and tolerance with standard CNC machine. If the experiment of adhesion is carried out during my stage in Milano the project will include the results of the experiment dealing with if the piston has acomplished it's function.
MatèriesPistons -- Design and construction, Machine-tools -- Numerical control, Pistons -- Disseny i construcció, Màquines-eines -- Control numèric
TitulacióENGINYERIA INDUSTRIAL (Pla 1994)
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
MasterThesis Eduard Jorba.pdf | Report | 40,81Mb | Accés restringit |