Ponències/Comunicacions de congressoshttp://hdl.handle.net/2117/34712024-03-29T00:01:02Z2024-03-29T00:01:02ZA flexible, smart and self-evolving actuator based on polypropylene mesh for hernia repair and a thermo-sensitive gelLanzalaco, SoniaMata, ChristianTuron, PauWeis, ChristineAlemán Llansó, CarlosArmelín Diggroc, Elaine Aparecidahttp://hdl.handle.net/2117/1804822020-07-23T23:00:30Z2020-03-19T08:52:41ZA flexible, smart and self-evolving actuator based on polypropylene mesh for hernia repair and a thermo-sensitive gel
Lanzalaco, Sonia; Mata, Christian; Turon, Pau; Weis, Christine; Alemán Llansó, Carlos; Armelín Diggroc, Elaine Aparecida
Here, a smart mesh actuator, able to self-evolve under temperature and humidity control,has been developed. Thermo-responsive poly(N-isopropylacrylamide) (PNIPAAm)-based materialsare widely appliedin biomedical field owingto theirexcellent biocompatibility and abrupt conformational change at a critical temperature very close to that of human body(~32 °C) [1-2]. The actuator is based on PNIPAAmgrafted on a commercial polypropylene (PP)mesh used for hernia repair[3].Flexible devices composed of PP-g-PNIPAAm arranged inmonolayer (one layer of PNIPAAm) and bilayer (two layers of PNIPAAm) conformationswere synthesized. The microstructureof the gel chains (chain length measurements) and the macromotion(unfolding angle observations) behavior of the composite mesh in water and air at different temperatures were studied. The motion is affected by the amount and the position of the gel (upper fibers or among them) and by the crosslinking degree. For the first time,a self-evolving motion sensor based on commercial hernia repair mesh has beenproduced by using a biocompatible hydrogel. The strategy can be easily extrapolated to complex mesh architectures
2020-03-19T08:52:41ZLanzalaco, SoniaMata, ChristianTuron, PauWeis, ChristineAlemán Llansó, CarlosArmelín Diggroc, Elaine AparecidaHere, a smart mesh actuator, able to self-evolve under temperature and humidity control,has been developed. Thermo-responsive poly(N-isopropylacrylamide) (PNIPAAm)-based materialsare widely appliedin biomedical field owingto theirexcellent biocompatibility and abrupt conformational change at a critical temperature very close to that of human body(~32 °C) [1-2]. The actuator is based on PNIPAAmgrafted on a commercial polypropylene (PP)mesh used for hernia repair[3].Flexible devices composed of PP-g-PNIPAAm arranged inmonolayer (one layer of PNIPAAm) and bilayer (two layers of PNIPAAm) conformationswere synthesized. The microstructureof the gel chains (chain length measurements) and the macromotion(unfolding angle observations) behavior of the composite mesh in water and air at different temperatures were studied. The motion is affected by the amount and the position of the gel (upper fibers or among them) and by the crosslinking degree. For the first time,a self-evolving motion sensor based on commercial hernia repair mesh has beenproduced by using a biocompatible hydrogel. The strategy can be easily extrapolated to complex mesh architecturesSelf-evolving thermal and motion sensor based on PP-g-PNIPAAm surgical meshes : From preparation to exploration of thermo-sensitivityLanzalaco, SoniaTuron, PauWeis, ChristineAlemán Llansó, CarlosArmelín Diggroc, Elaine Aparecidahttp://hdl.handle.net/2117/1683712020-07-23T22:59:38Z2019-09-18T13:11:57ZSelf-evolving thermal and motion sensor based on PP-g-PNIPAAm surgical meshes : From preparation to exploration of thermo-sensitivity
Lanzalaco, Sonia; Turon, Pau; Weis, Christine; Alemán Llansó, Carlos; Armelín Diggroc, Elaine Aparecida
2019-09-18T13:11:57ZLanzalaco, SoniaTuron, PauWeis, ChristineAlemán Llansó, CarlosArmelín Diggroc, Elaine AparecidaTemperature-responsive bending studies of a PP-g-PNIPAAm mesh for hernia repairLanzalaco, SoniaTuron, PauWeis, ChristineAlemán Llansó, CarlosArmelín Diggroc, Elaine Aparecidahttp://hdl.handle.net/2117/1683702020-07-23T22:29:01Z2019-09-18T13:03:11ZTemperature-responsive bending studies of a PP-g-PNIPAAm mesh for hernia repair
Lanzalaco, Sonia; Turon, Pau; Weis, Christine; Alemán Llansó, Carlos; Armelín Diggroc, Elaine Aparecida
2019-09-18T13:03:11ZLanzalaco, SoniaTuron, PauWeis, ChristineAlemán Llansó, CarlosArmelín Diggroc, Elaine AparecidaPolymer hydrogels: looking for green synthesis and bioengineering applicationsLanzalaco, SoniaArmelín Diggroc, Elaine Aparecidahttp://hdl.handle.net/2117/1683682020-07-23T21:47:15Z2019-09-18T12:49:45ZPolymer hydrogels: looking for green synthesis and bioengineering applications
Lanzalaco, Sonia; Armelín Diggroc, Elaine Aparecida
A staggering number of medical devices, including healthcare products for diagnosis and therapy, have exploited biomaterials as platform technologies. Rational biomaterials design requires to pay attention to both, materials and biological considerations. They can be employed to treat or replace any tissues or function of living tissues and to engineer systems that could control, for example, the drug delivery [1]. The term biomaterial includes metals and ceramics, but polymers account for the vast majority and, among them, polymer hydrogels represent one of the most promising groups. Hydrogels consist of three-dimensional crosslinked networks able to absorb large amounts of water while maintaining their dimensional stability, also capable to act as stimuli-responsive to external and internal triggers [1]. Regarding the biomedical applications, the development of new synthetic routes to reduce the toxicity of residual monomer and chemicals (e.g., initiators, surfactants, etc.) is required. Recently, a green and straightforward approach for the production of polymer nanogels, used as nanovectors to deliver drug molecules, based on the recourse to high energy irradiation of aqueous solutions of preformed polymers has been reported [2]. Pulsed electron beams are usedto induce the generation of free radicals directly onto the polymer chains, without any additional reagent [2]. With a similar purpose, electrochemical advanced oxidation technologies may offer an interesting approach. As recently shown, the obtention of a crosslinked poly(vinylpyrrolidone)(PVP) hydrogel by means of electrogenerated of hydroxyl radicals is feasible [3]. The sensitivity of hydrogels to different stimuli opens new horizons in the design of biomedical devices interacting with the human body. By coupling a hard polymer currently used in the biomedical field to soft and sensitive gels, new smart materials with better performance than the former can be produced. Poly-(N-isopropylacrylamide) (PNIPAAm)-based hydrogels are particularly and extensively investigated as thermal actuators due to its critical temperature (LCST) close to that of the human body (around 36.5–37.5 ºC). Thus, several applications are possible, from drug delivery to tissue engineering, followed by stem cells, microf uidic devices, biosensors, and bioimaging [4]. An overview of innovative synthetic routes for hydrogels synthesis, such as the one based on the employment of electrochemical technologies, will be given. Further, a very appealing new class of thermoresponsive surgical meshes acting as thermosensitive biomedical sensors, currently investigated within the framework of the 4D-POLYSENSE European project, will be presented
2019-09-18T12:49:45ZLanzalaco, SoniaArmelín Diggroc, Elaine AparecidaA staggering number of medical devices, including healthcare products for diagnosis and therapy, have exploited biomaterials as platform technologies. Rational biomaterials design requires to pay attention to both, materials and biological considerations. They can be employed to treat or replace any tissues or function of living tissues and to engineer systems that could control, for example, the drug delivery [1]. The term biomaterial includes metals and ceramics, but polymers account for the vast majority and, among them, polymer hydrogels represent one of the most promising groups. Hydrogels consist of three-dimensional crosslinked networks able to absorb large amounts of water while maintaining their dimensional stability, also capable to act as stimuli-responsive to external and internal triggers [1]. Regarding the biomedical applications, the development of new synthetic routes to reduce the toxicity of residual monomer and chemicals (e.g., initiators, surfactants, etc.) is required. Recently, a green and straightforward approach for the production of polymer nanogels, used as nanovectors to deliver drug molecules, based on the recourse to high energy irradiation of aqueous solutions of preformed polymers has been reported [2]. Pulsed electron beams are usedto induce the generation of free radicals directly onto the polymer chains, without any additional reagent [2]. With a similar purpose, electrochemical advanced oxidation technologies may offer an interesting approach. As recently shown, the obtention of a crosslinked poly(vinylpyrrolidone)(PVP) hydrogel by means of electrogenerated of hydroxyl radicals is feasible [3]. The sensitivity of hydrogels to different stimuli opens new horizons in the design of biomedical devices interacting with the human body. By coupling a hard polymer currently used in the biomedical field to soft and sensitive gels, new smart materials with better performance than the former can be produced. Poly-(N-isopropylacrylamide) (PNIPAAm)-based hydrogels are particularly and extensively investigated as thermal actuators due to its critical temperature (LCST) close to that of the human body (around 36.5–37.5 ºC). Thus, several applications are possible, from drug delivery to tissue engineering, followed by stem cells, microf uidic devices, biosensors, and bioimaging [4]. An overview of innovative synthetic routes for hydrogels synthesis, such as the one based on the employment of electrochemical technologies, will be given. Further, a very appealing new class of thermoresponsive surgical meshes acting as thermosensitive biomedical sensors, currently investigated within the framework of the 4D-POLYSENSE European project, will be presentedSustained release of a pharmacological chaperone that increases the activity of misfolded ß-GlucocerebrosidaseEnshaei, HamidrezaMolina García, Brenda GuadalupeValle Mendoza, Luis Javier delEstrany Coda, FrancescArnan, CarmePuiggalí Bellalta, JordiSaperas Plana, NúriaAlemán Llansó, Carloshttp://hdl.handle.net/2117/1659772024-03-24T05:38:34Z2019-07-10T13:43:09ZSustained release of a pharmacological chaperone that increases the activity of misfolded ß-Glucocerebrosidase
Enshaei, Hamidreza; Molina García, Brenda Guadalupe; Valle Mendoza, Luis Javier del; Estrany Coda, Francesc; Arnan, Carme; Puiggalí Bellalta, Jordi; Saperas Plana, Núria; Alemán Llansó, Carlos
2019-07-10T13:43:09ZEnshaei, HamidrezaMolina García, Brenda GuadalupeValle Mendoza, Luis Javier delEstrany Coda, FrancescArnan, CarmePuiggalí Bellalta, JordiSaperas Plana, NúriaAlemán Llansó, CarlosEffect of corrosion-induced damage on microstructure and residual strenght of WC-Co,Ni cemented carbideZheng, Y.F.Fargas Ribas, GemmaArmelín Diggroc, Elaine AparecidaLlanes Pitarch, Luis Miguelhttp://hdl.handle.net/2117/1301792022-03-13T02:07:40Z2019-03-08T14:15:01ZEffect of corrosion-induced damage on microstructure and residual strenght of WC-Co,Ni cemented carbide
Zheng, Y.F.; Fargas Ribas, Gemma; Armelín Diggroc, Elaine Aparecida; Llanes Pitarch, Luis Miguel
2019-03-08T14:15:01ZZheng, Y.F.Fargas Ribas, GemmaArmelín Diggroc, Elaine AparecidaLlanes Pitarch, Luis MiguelSencillo tratamiento térmico para la optimización irreversible de la conductividad eléctrica del Poli(3,4-Etilendioxitiofeno)Sánchez Jiménez, MargaritaPeres, RafaelCasellas Beneyto, FranciscoFERREIRA, CARLOSFRANCO, LOURDESPuiggalí Bellalta, JordiEstrany Coda, FrancescAlemán Llansó, Carloshttp://hdl.handle.net/2117/781772022-03-13T04:39:52Z2015-10-23T08:58:54ZSencillo tratamiento térmico para la optimización irreversible de la conductividad eléctrica del Poli(3,4-Etilendioxitiofeno)
Sánchez Jiménez, Margarita; Peres, Rafael; Casellas Beneyto, Francisco; FERREIRA, CARLOS; FRANCO, LOURDES; Puiggalí Bellalta, Jordi; Estrany Coda, Francesc; Alemán Llansó, Carlos
2015-10-23T08:58:54ZSánchez Jiménez, MargaritaPeres, RafaelCasellas Beneyto, FranciscoFERREIRA, CARLOSFRANCO, LOURDESPuiggalí Bellalta, JordiEstrany Coda, FrancescAlemán Llansó, CarlosNanotechnology for detection of biomolecules and fabrication of bioactives platformsAlemán Llansó, CarlosPérez Madrigal, Maria del MarFabregat Jové, GeorginaArmelín Diggroc, Elaine Aparecidahttp://hdl.handle.net/2117/267972021-04-29T04:10:39Z2015-03-18T12:08:06ZNanotechnology for detection of biomolecules and fabrication of bioactives platforms
Alemán Llansó, Carlos; Pérez Madrigal, Maria del Mar; Fabregat Jové, Georgina; Armelín Diggroc, Elaine Aparecida
2015-03-18T12:08:06ZAlemán Llansó, CarlosPérez Madrigal, Maria del MarFabregat Jové, GeorginaArmelín Diggroc, Elaine AparecidaGestió de projectes experimentals al laboratoriGraells Sobré, MoisèsPérez Moya, MontserratBernal, FernandoBoada Altarriba, EnricBorràs Cristòfol, NúriaCalvet Tarragona, AureliCarral Mahia, Eva MªDosta Parcerisa, JordiEspuña Camarasa, AntonioLópez Mesas, MontserratMiguel Gisbert, Leopoldo dePujol, CarmeSánchez, MargaritaValle Mendoza, Luis Javier delCapón García, ElisabetNadal Cabezas, SergiPérez, MarYélamos Ruiz, IgnacioBello, M. CaminoOrtega Álvarez, EstherSan Antonio Benito, Virginiahttp://hdl.handle.net/2117/231642022-05-01T03:40:46Z2014-06-05T12:08:31ZGestió de projectes experimentals al laboratori
Graells Sobré, Moisès; Pérez Moya, Montserrat; Bernal, Fernando; Boada Altarriba, Enric; Borràs Cristòfol, Núria; Calvet Tarragona, Aureli; Carral Mahia, Eva Mª; Dosta Parcerisa, Jordi; Espuña Camarasa, Antonio; López Mesas, Montserrat; Miguel Gisbert, Leopoldo de; Pujol, Carme; Sánchez, Margarita; Valle Mendoza, Luis Javier del; Capón García, Elisabet; Nadal Cabezas, Sergi; Pérez, Mar; Yélamos Ruiz, Ignacio; Bello, M. Camino; Ortega Álvarez, Esther; San Antonio Benito, Virginia
2014-06-05T12:08:31ZGraells Sobré, MoisèsPérez Moya, MontserratBernal, FernandoBoada Altarriba, EnricBorràs Cristòfol, NúriaCalvet Tarragona, AureliCarral Mahia, Eva MªDosta Parcerisa, JordiEspuña Camarasa, AntonioLópez Mesas, MontserratMiguel Gisbert, Leopoldo dePujol, CarmeSánchez, MargaritaValle Mendoza, Luis Javier delCapón García, ElisabetNadal Cabezas, SergiPérez, MarYélamos Ruiz, IgnacioBello, M. CaminoOrtega Álvarez, EstherSan Antonio Benito, VirginiaAnálisis de las variables geométricas del frontal del vehículo en la protección del peatónGallegos Díez, DavidLiesa Mestres, FranciscoSantos López, M. Antonia de loshttp://hdl.handle.net/2117/178662021-05-21T02:13:47Z2013-02-19T08:42:53ZAnálisis de las variables geométricas del frontal del vehículo en la protección del peatón
Gallegos Díez, David; Liesa Mestres, Francisco; Santos López, M. Antonia de los
El objetivo principal de este proyecto de investigación es determinar la influencia de las variables geométricas del frontal del vehículo en las potenciales lesiones que pueden producirse a un peatón como consecuencia de un accidente. Este objetivo se consigue mediante el desarrollo de algoritmos específicos a partir de las medidas geométricas del frontal como variables de entrada y obteniendo la aceleración, el momento flector y el esfuerzo cortante como resultados. Este algoritmo puede aportar resultados iniciales sin necesidad de preparar un modelo de simulación específico o realizar ensayos de choque en laboratorio.
Los principales resultados conseguidos en este proyecto de investigación son:
La aceleración mínima y media del impacto desciende cuando la distancia longitudinal entre la traviesa de deformación y la traviesa de peatones aumenta. Asimismo, se detecta un decremento del esfuerzo cortante al aumentar esta distancia, por la influencia en la cinemática y dinámica que implica en el impactor.
La distancia vertical entre la traviesa de deformación y la traviesa de peatones se considera como no significativa después de analizar los resultados del algoritmo.
Por otro lado, la aceleración, minima y media, aumenta cuando se incrementa la altura del vehículo, resultado de la menor rotación del impactor en el impacto. El comportamiento del momento flector es análogo a la aceleración. El esfuerzo cortante varia en función de los puntos de contacto con el frontal, detectándose los valores máximos cuando los puntos de impacto con la rodilla están cercanos a la altura de la traviesa de deformación.
Como resultado global, la cinemática y la dinámica del impactor indican que cuando se incrementa la distancia longitudinal entre traviesas, se obtiene un frontal con mayor capacidad de energía, y una rotación diferente del impactor durante el choque.
Este trabajo de investigación proporciona un nuevo modelo de simulación aplicado a la protección de peatones. Este modelo es capaz de predecir los resultados de lesiones en un impacto con la extremidad inferior, en términos de aceleración, esfuerzo cortante y momento flector del impactor, únicamente teniendo un primer modelo del frontal del vehículo. Por tanto, este modelo matemático es de aplicación general en la industria del automóvil en los próximos años.
2013-02-19T08:42:53ZGallegos Díez, DavidLiesa Mestres, FranciscoSantos López, M. Antonia de losEl objetivo principal de este proyecto de investigación es determinar la influencia de las variables geométricas del frontal del vehículo en las potenciales lesiones que pueden producirse a un peatón como consecuencia de un accidente. Este objetivo se consigue mediante el desarrollo de algoritmos específicos a partir de las medidas geométricas del frontal como variables de entrada y obteniendo la aceleración, el momento flector y el esfuerzo cortante como resultados. Este algoritmo puede aportar resultados iniciales sin necesidad de preparar un modelo de simulación específico o realizar ensayos de choque en laboratorio.
Los principales resultados conseguidos en este proyecto de investigación son:
La aceleración mínima y media del impacto desciende cuando la distancia longitudinal entre la traviesa de deformación y la traviesa de peatones aumenta. Asimismo, se detecta un decremento del esfuerzo cortante al aumentar esta distancia, por la influencia en la cinemática y dinámica que implica en el impactor.
La distancia vertical entre la traviesa de deformación y la traviesa de peatones se considera como no significativa después de analizar los resultados del algoritmo.
Por otro lado, la aceleración, minima y media, aumenta cuando se incrementa la altura del vehículo, resultado de la menor rotación del impactor en el impacto. El comportamiento del momento flector es análogo a la aceleración. El esfuerzo cortante varia en función de los puntos de contacto con el frontal, detectándose los valores máximos cuando los puntos de impacto con la rodilla están cercanos a la altura de la traviesa de deformación.
Como resultado global, la cinemática y la dinámica del impactor indican que cuando se incrementa la distancia longitudinal entre traviesas, se obtiene un frontal con mayor capacidad de energía, y una rotación diferente del impactor durante el choque.
Este trabajo de investigación proporciona un nuevo modelo de simulación aplicado a la protección de peatones. Este modelo es capaz de predecir los resultados de lesiones en un impacto con la extremidad inferior, en términos de aceleración, esfuerzo cortante y momento flector del impactor, únicamente teniendo un primer modelo del frontal del vehículo. Por tanto, este modelo matemático es de aplicación general en la industria del automóvil en los próximos años.