Browsing by Subject "Zirconium alloys"
Now showing items 1-6 of 6
-
Green nanocoatings based on the deposition of zirconium oxide: the role of the substrate
(Multidisciplinary Digital Publishing Institute (MDPI), 2021-02-23)
Article
Open AccessHerein, the influence of the substrate in the formation of zirconium oxide monolayer, from an aqueous hexafluorozirconic acid solution, by chemical conversion and by electro-assisted deposition, has been approached. The ... -
Mechanical properties of 12Ce-ZrO2/3Y-ZrO2 composites
(2015-12-01)
Article
Open Access12Ce-ZrO2/3Y-ZrO2 composites with different compositions have been prepared by presureless sintering at 1450 degrees C and the resulting microstructures have been correlated with their mechanical properties in terms of ... -
Methanol steam reforming behavior of copper impregnated over CeO2-ZrO2 derived from a surfactant assisted coprecipitation route
(2015-09-07)
Article
Open AccessA series of ceria-zirconia solid solutions has been prepared by a surfactant assisted coprecipitation method. After impregnation of copper, their activities have been assessed for methanol steam reforming. The results ... -
Nanoindentación de capas finas de ZrW
(Universitat Politècnica de Catalunya, 2009-02)
Master thesis (pre-Bologna period)
Open AccessEl objetivo de este proyecto es de determinar el mejor modelo analítico para caracterizar el comportamiento mecánico (modulo elástico y dureza) de una capa fina de ZrW depositada sobre un sustrato de sílice. Para el ... -
Sequence of phase transformations in metastable ß Zr–12Nb alloy studied in situ by HEXRD and complementary techniques
(Elsevier, 2023-03-01)
Article
Open AccessPhase transformations in a metastable beta Zr–12Nb alloy were investigated by high-energy X-ray diffraction (HEXRD) measured simultaneously with thermal expansion in situ during linear heating from room temperature to 800 ... -
The influence of unshielded small cracks in the fracture toughness of yttria and of ceria stabilised zirconia
(Elsevier, 2016-01-01)
Article
Restricted access - publisher's policyThe fracture toughness, Ric of two 3Y-ZrO2 with different grain size (177 and 330 nm) and 12Ce-ZrO2 were determined from a sharp micro-machined notch by Ultra-Short Pulsed Laser Ablation (UPLA) where a micro-cracked zone ...