Browsing by Subject "Satèl·lits artificials -- Aparells i instruments"
Now showing items 1-20 of 21
-
A multi-agent adaptive protocol for femto-satellite applications
(Universitat Politècnica de Catalunya, 2011-07-15)
Bachelor thesis
Open AccessFemto-satellites are a very promising category of satellites that weigh less than 100 grams. Also, a Pico-Rover it is a self-contained robot that weighs less than 1 kilogram and its motion works by rolling the external ... -
Aiding a SLAM system with an IMU sensor
(Universitat Politècnica de Catalunya, 2019-03-29)
Bachelor thesis
Restricted access - author's decision
Covenantee: Università degli studi di Roma "La Sapienza"This project consists of aid an existing SLAM system by developing and implementing a motion estimator based on the Inertial measurements of a VI-sensor in the SLAM pipeline. This entire project has been carried out at ... -
Comparativa de sensores espaciales de diferente resolución espectral en la exploración minera
(Universitat Politècnica de Catalunya, 2016-07)
Master thesis
Open AccessEl reconocimiento de minerales en la superficie terrestre se lleva a cabo desde hace años con imágenes captadas desde satélites artificiales (LANDSAT, SPOT, EO-1, TERRA, etc.). La resolución espectral de los sensores a ... -
Design and implementation of a single On-Board Computer for CubeSats
(Universitat Politècnica de Catalunya, 2019-09)
Master thesis
Open Accesshis document reports the process of design, implementation, and testing of an On-Board Computer for CubeSats in a single 1U-sized CubeSat PCB. The aim is to design a modular, cheap, e cient and exible product than could ... -
Design of a low-latency transoceanic shortwave radio link for high frequency trading applications
(Universitat Politècnica de Catalunya, 2019-10-30)
Bachelor thesis
Open AccessThe main objective of this final Bachelor’s degree project is to design and study the relia-bility of a transoceanic shortwave radio link that connects London and New York. Two ofthe most important stock exchanges of the ... -
Disseny i implementació d'una PCU (Power Control Unit) per als Receiver Amplifier Subsystem del satèl·lit Biomass de la ESA
(Universitat Politècnica de Catalunya, 2019-02-06)
Bachelor thesis
Restricted access - author's decisionAquest treball presenta el procediment del disseny de la Power and Control Unit (PCU) dels Receiver Amplifier Subsystem(RAS) del satèl·lit Biomass, contenint el procés de disseny, simulacions i ... -
Efectes de la radiació sobre els components electrònics d'un satèl·lit en òrbita al voltant de la Terra
(Universitat Politècnica de Catalunya, 2011-06-03)
Bachelor thesis
Open AccessAquest treball analitza els efectes de la radiacio a l'espai sobre components electronics. En particular, considerem els efectes de la radiacio sobre el Wikisat, un femto-satel?lit desenvolupat a l'EETAC que es llancara ... -
Fabricación de un sensor solar en dos ejes para el satélite IntaMicroSat
(Universitat Politècnica de Catalunya, 2011-07-15)
Master thesis (pre-Bologna period)
Open AccessEnglish: he goal of this project is the fabrication of a two axis sun sensor for the attitude control of the IntaMicroSat satellite. This sensor should detect the position of the sun with high accuracy (±1 º) and at an ... -
Implementation of a long range radio-link system for femto-satellites in very Low Earth Orbit
(Universitat Politècnica de Catalunya, 2013-11-05)
Bachelor thesis
Open AccessThis Final Bachelor Work (TFC) is based on real implementations of long range radio-link systems (having at least 9,600 bps) for femtosatellites (mass lower than 100 grams) in very Low Earth Orbit in 250 km and few weeks ... -
Indoor and outdoor rover with Simultaneous Localization And Mapping (SLAM)
(Universitat Politècnica de Catalunya, 2011-12-01)
Master thesis
Open AccessThis work describes the design, development and implementation of a SLAM (Simultaneous Localization And Mapping) consists of two subsystems: low-cost autonomous robot and a ground station where telemetry data and information ... -
Mechanical design, implementation and testing of a helix antenna deployment system for a 1U CubeSat
(Universitat Politècnica de Catalunya, 2019-07-19)
Master thesis
Restricted access - author's decisionCubeSats are the tech trend in the space sector. They allow to send experiments to orbit the Earth using reduced dimensions. This is the case of the 3Cat-4, a mission developed in the Nano-Satellite and Payload Laboratory ... -
OUFTI-NEXT : study of refractive lenses for an infrared camera
(Universitat Politècnica de Catalunya, 2019-05-22)
Master thesis
Open Access
Covenantee: Université de Liège / Centre Spatial de LiègeThe aim of this master thesis is to survey the capability of a refractive design to accommodate the requirements of the OUFTI-NEXT payload. The optical design for thermal infrared camera is challenging:• the lack of glass ... -
Proyecto de diseño y construcción de la estructura de un rotor de antena con movilidad autónoma con impresora 3D para la Terrassa Groun Station (TGS)
(Universitat Politècnica de Catalunya, 2016-06)
Bachelor thesis
Restricted access - author's decisionEn estos últimos años la impresión 3D se está consolidando como una buena manera de fabricar piezas de manera rápida, sencilla y eficaz. Sus usos pueden ser muy variados, hoy en día esta tecnología es utilizada en diversos ... -
Radiation environment over the WFM detector in LOFT's ESA space mission
(Universitat Politècnica de Catalunya, 2013-05-20)
Master thesis
Open Access[ANGLÈS] The analysis of the radiation environment to which a space mission is exposed is of great importance given the negative effects that radiation could cause in different scientific instruments. In this work we carried ... -
Simulació i caracterització d'un simulador solar
(Universitat Politècnica de Catalunya, 2012-07-09)
Bachelor thesis
Open AccessThe objective pursued with this Final Bachelor thesis is to support the activity of Remote Sensing research group of the UPC, which are developing the Cubesat UPCSat-1, a picosatellite with 10x10x10cm dimension (1U). This ... -
Study and design of a Business Model for a micro-launcher company operating in Very Low Earth Orbit (VLEO) missions
(Universitat Politècnica de Catalunya, 2019-01-10)
Bachelor thesis
Restricted access - author's decisionThis thesis is about thedesign of a businessmodelfor a micro-launchercompany operating in Very Low Earth Orbit (VLEO) missionsafter apreliminarybut extensive study ofthe industry:the current political,social, technological ... -
Study and design of the Business Model CANVAS for an aircraft assisted microlauncher company in VLEO missions
(Universitat Politècnica de Catalunya, 2018-09-10)
Bachelor thesis
Restricted access - author's decisionThe aim of this proposal is to establish the business model CANVAS for a new company operating in the VLEO market to launch drone assisted micro-satelites for Earth Observation missions. -
Study and Validation of a 5.8 GHz Video-Link for a Lunar Pico-Rover
(Universitat Politècnica de Catalunya, 2013-02-15)
Bachelor thesis
Open AccessThis work is a study of a basic video-link for a future Lunar Explorer Rover. The rover is a ball-like robot that is involved in the Google Lunar X-Prize s a part of Team FREDNET. The use of the 5.8 GHz band allows a large ... -
Study, design and testing of an helix antenna deployment system for a 1U CubeSat
(Universitat Politècnica de Catalunya, 2018-06)
Bachelor thesis
Restricted access - author's decision -
Tools for validation of the Lightning Imager sensor on the 3rd generation of the METEOSAT weather satellite
(Universitat Politècnica de Catalunya, 2020-11-27)
Master thesis
Open AccessThe 3rd generation of the METEOSAT (MTG) will be equipped with a lightning imager sensor (LI) to detect and locate lightning flashes. The field-of-view of the LI-MTG will cover Europe and Africa. Since the LI-MTG will ...
