Exploració per tema "Piles de combustible d'òxid sòlid"
Ara es mostren els items 1-7 de 7
-
3D-printing of 8Y-TZP solid oxide fuel cell electrolytes
(Universitat Politècnica de Catalunya, 2019-02-15)
Projecte Final de Màster Oficial
Accés obert
Realitzat a/amb: UNIVERSITÉ DE LORRAINEIn this Master's thesis were printed electrolytes for Solid Oxide Fuel Cell (SOFC) in yttria stabilized zirconia by additive manufacturing robocasting method and then characterized from the microstructural and mechanical ... -
Effect of redox treatments on Ce0.50Zr0.50O2 based solid oxide fuel cell anodes
(2014-12-15)
Article
Accés restringit per política de l'editorialThis work investigates the activity of copper modified Ce0.50Zr0.50O2 (Cu-CZ) based anodes prepared through subsequent impregnation steps into a porous YSZ matrix. The ceria zirconia oxide was reduced at increasing ... -
Evaluation of a pilot-scale sewage biogas powered 2.8 kWe Solid Oxide Fuel Cell: assessment of heat-to-power ratio and influence of oxygen content
(2015-12-30)
Article
Accés obertBiogas from anaerobic digestion of organic matter is a promising renewable energy source and fuel cells appear as a breakthrough technology to improve the performance of the biogas-to-energy valorisation chain. The vast ... -
Fabricación y caracterización eléctrica de pilas de combustible de óxido sólido (SOFCs) de geometría microtubular basadas en electrolitos de ceria dopada
(Universitat Politècnica de Catalunya, 2014-06)
Projecte/Treball Final de Carrera
Accés restringit per decisió de l'autorLas pilas de combustible de óxido sólido (SOFC) se han convertido en una prometedora alternativa a los sistemas de producción de electricidad actuales, ya que consiguen eficiencias relativamente elevadas, así como bajas ... -
Performance of a novel type of electrolyte-supported solid oxide fuel cell with honeycomb structure
(2010-01-15)
Article
Accés restringit per política de l'editorialA novel design, alternative to the conventional electrolyte-supported solid oxide fuel cell (SOFC) is presented. In this new design, a honeycomb-electrolyte is fabricated from hexagonal cells, providing high mechanical ... -
Steam reforming kinetics over Ni-YSZ used as Anode Material for Solid Oxide Fuel Cells
(Universitat Politècnica de Catalunya / Denmarks Tekniske Universitet (Technical University of Denmark), 2008)
Projecte/Treball Final de Carrera
Accés restringit per acord de confidencialitat -
Structural and electrocatalytic properties of molten core Sn@SnOx nanoparticles on ceria
(2016-11-15)
Article
Accés obertThe morphological and chemical modifications following reduction in hydrogen at 873 K of stannic oxide deposited on ceria particles were studied in order to gain insights into the nature of Ce-Sn interaction under reducing ...
