Browsing by Subject "Materials--Mechanical properties"
Now showing items 1-20 of 57
-
Accumulative roll bonding of aluminum/stainless steel sheets
(2017-06)
Article
Open AccessAn Al/Stainless Steel/Al lamellar composite was produced by roll bonding of the starting sheets at 400 °C. Afterward, the roll bonded sheet was cut in half and the accumulative roll bonding (ARB) process at room temperature ... -
Analysis of the micro and substructural evolution during severe plastic deformation of ARMCO iron and consequences in mechanical properties
(2019-01-07)
Article
Restricted access - publisher's policyARMCO iron processed by ECAP up to a maximum equivalent strain of sixteen ECAP passes following route Bc was investigated by Electron Back Scattering Diffraction (EBSD), Transmission Electron Microscopy (TEM), TEM-EBSD and ... -
Annealing aged zirconia: study of surface mechanical properties at the micrometric length scale
(Elsevier, 2015-03-01)
Article
Open AccessThe annealing of hydrothermal aged zirconia has been studied by analysing the changes in microstructure and surface mechanical properties in terms of the annealing temperature. In this experimental work, a systematic micro- ... -
Application of a finite-element formulation to the cold compaction of metal powders
(1993)
Conference report
Open Access -
Application of configurational mechanics to crack propagation
(International Centre for Numerical Methods in Engineering (CIMNE), 2017)
Conference report
Open AccessCrack initiation and propagation is an essential aspect in the mechanical behavior of a large variety of materials and structures in all fields of Engineering and, in particular, the prediction of crack trajectories is one ... -
Caracterización termo-mecánica de un grado de PLA mediante la técnica de DMTA
(2017-10-06)
External research report
Restricted access - confidentiality agreement -
Cellulosic fiber reinforced cement-based composites: a review of recent research
(2015-01-21)
Article
Open AccessIn the last few years, an increase in interest has been given to the use of cellulose fibers as alternatives for conventional reinforcements in composites. The development of commercially viable environmentally friendly ... -
Characterisation and modelling of prestrained viscoelastic films
(2014-04)
Article
Restricted access - publisher's policyThe goal of the present work is to characterise the influence of static prestrain on the elastic and dissipative properties of constrained viscoelastic films. Dynamic mechanical analysis (DMA) technique is considered for ... -
Characterization of nonhomogeneity in the dispersive properties of the materials used in pipes
(Institute of Electrical and Electronics Engineers (IEEE), 2017)
Conference report
Restricted access - publisher's policyThis article is focused on the characterization of the lack of homogeneity in the dispersive acoustic properties of polymeric materials used in industrial pipes. Usually, the parameter of interest associated to dispersion ... -
Comportamiento mecánico dinámico de espumas de policarbonato
(Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), 2014)
Conference report
Restricted access - publisher's policySe caracterizan por DMTA espumas de policarbonato (PC) y de policarbonato con nanopartículas de grafeno, producidas mediante dos procesos diferentes de disolución de CO2 supercrítico con posterior expansión en una o en dos ... -
Composites from keratin biofibers. Study of compatibility using polyolephinic matrices
(2012)
Conference report
Restricted access - publisher's policyThe study deals with the analysis and characterization of chicken feathers (CFs) based thermoplastic composites. The performance of the composite has been characterized in terms of mechanical properties which have been ... -
Design and study of SPD processes; HPT and MF
(Universitat Politècnica de Catalunya, 2018-01-26)
Master thesis
Open AccessThis master thesis aims to model the severe plastic deformation through the HPT (High Pressure Torsion) and MDF (Multi Directional Forging) methods in order to determine the necessary external loads. These external loads, ... -
Effect of crystal anisotropy on the mechanical properties of WC embedded in WC-Co cemented carbides
(2011)
Conference report
Open Access -
Effect of surface treatment of titanium dioxide nanoparticles on non-isothermal crystallization behavior, viscoelastic transitions and cold crystallization of poly(ethylene terephthalate) nanocomposites
(2014-01-01)
Article
Restricted access - publisher's policyThe effect of untreated and tri-n-octylphosphine oxide (TOPO) surface-treated TiO2 nanoparticles when included as filler in poly (ethylene terephthalate) on its compatibility, non-isothermal crystallization behavior, ... -
Effect of the filler on the nanomechanical properties of polypropylene in contact with paraffinic phase change material
(2015-02)
Article
Open AccessAs the changes on the mechanical properties with depth of indentation provide valuable information that may be suitable for design purposes, nanoindentation is an adequate technique for investigating the nanomechanical ... -
Effect of the viscosity ratio on the PLA/PA10.10 bioblends morphology and mechanical properties
(2018-01-30)
Article
Open AccessPLA bio-blends with a predominantly biosourced PA10.10 in the composition range 10-50wt.% were prepared by melt blending in order to overcome the advanced brittleness of PLA. Due to the inherent immiscibility of the blends, ... -
Effects of building condition on the tensile property of FFF Timberfill parts
(2018)
Conference report
Restricted access - publisher's policyThis paper presents a study of mechanical properties of Fused Deposition Modeling (FDM) rapid prototyping processed material Timberfill. In this study, four important process parameters such as layer thickness, density, ... -
Elastic properties and strain-to-crack-initiation of calcium phosphate bone cements: revelations of a high-resolution measurement technique
(Elsevier, 2017-10-01)
Article
Open AccessCalcium phosphate cements (CPCs) should ideally have mechanical properties similar to those of the bone tissue the material is used to replace or repair. Usually, the compressive strength of the CPCs is reported and, more ... -
Epoxy coupling agents for PLA and PHB copolymer-based cotton fabric bio-composites
(Elsevier, 2018-09-01)
Article
Open AccessEpoxy coupling agent was deposed on cotton fabric used for the formation of film stacked composites based on poly(lactic acid) (PLA) or a poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHB) matrices. The additive confining ... -
Equal channel angular pressing of a TWIP steel: microstructure and mechanical response
(Springer, 2017-06-01)
Article
Open AccessA Fe–20.1Mn–1.23Si–1.72Al–0.5C TWIP steel with ultrafine grain structure was successfully processed through equal channel angular pressing (ECAP) at warm temperature up to four passes following the BC route. The microstructure ...